PassLeader Premium Juniper JN0-370 Exam Dumps in VCE and PDF for Free Previewing (Question 181 – Question 200)

The newest Juniper JN0-370 dumps are available from PassLeader, you can get both JN0-370 VCE dumps and JN0-370 PDF dumps from PassLeader! PassLeader have added the newest JN0-370 exam questions into its JN0-370 VCE and PDF dumps now, the new JN0-370 braindumps will help you 100% passing the JNCIS-QF JN0-370 exam. Welcome to download the valid PassLeader JN0-370 dumps VCE and PDF here: https://www.passleader.com/jn0-370.html (281 Q&As Dumps)

Besides, download that PassLeader JN0-370 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpbzlHTmN4Q2VTV1U (FREE VERSION!!!)

QUESTION 181
You are asked to configure a link aggregation group (LAG) between a QFabric system and an attached MX Series router. This LAG must support Layer 3 communications and must be associated with multiple VLANs. Which configuration approach should you use?

A.    Configure a Layer 3 LAG with the native-vlan option while ensuring that all desired VLANs are part of the native VLAN.
B.    Configure a Layer 2 LAG as a trunk port for the desired VLANs ensuring that the required RVIs are defined and associated with those VLANs.
C.    Configure a Layer 3 LAG with the vlan-tagging option with the required logical units and the parameters needed to support the desired VLANs.
D.    Configure a Layer 2 LAG with the vlan-tagging and inet options along with the required logical units and parameters needed to support the desired VLANs.

Passing Guarantee Juniper JN0-370 Dumps from PassLeader JN0-370 VCE and PDF for Free (Question 161 – Question 180)

The newest Juniper JN0-370 dumps are available from PassLeader, you can get both JN0-370 VCE dumps and JN0-370 PDF dumps from PassLeader! PassLeader have added the newest JN0-370 exam questions into its JN0-370 VCE and PDF dumps now, the new JN0-370 braindumps will help you 100% passing the JNCIS-QF JN0-370 exam. Welcome to download the valid PassLeader JN0-370 dumps VCE and PDF here: https://www.passleader.com/jn0-370.html (281 Q&As Dumps)

Besides, download that PassLeader JN0-370 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpbzlHTmN4Q2VTV1U (FREE VERSION!!!)

QUESTION 161
In the exhibit, OSPF routers R1, R2, R3, and R4 come up, in order, at 1-minute intervals Which router will be the designated router?
passleader-JN0-370-dumps-1611

A.    R1
B.    R2
C.    R3
D.    R4

Download Free Juniper JN0-370 Exam Dumps VCE and PDF Collection from PassLeader (Question 141 – Question 160)

The newest Juniper JN0-370 dumps are available from PassLeader, you can get both JN0-370 VCE dumps and JN0-370 PDF dumps from PassLeader! PassLeader have added the newest JN0-370 exam questions into its JN0-370 VCE and PDF dumps now, the new JN0-370 braindumps will help you 100% passing the JNCIS-QF JN0-370 exam. Welcome to download the valid PassLeader JN0-370 dumps VCE and PDF here: https://www.passleader.com/jn0-370.html (281 Q&As Dumps)

Besides, download that PassLeader JN0-370 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpbzlHTmN4Q2VTV1U (FREE VERSION!!!)

QUESTION 141
An operator is unable to establish any IS-IS adjacencies on a router in the network. Based on the configuration shown in the exhibit, what is the problem?
interfaces {
ge-0/0/0 {
vlan-tagging;
unit 100 {
vlan-id 100;
family inet {
address 192.168.100.97/30;
}
family iso;
}
unit 200 {
vlan-id 200;
family inet {
address 192.168.100.94/30;
}
family iso;
}
}
fxp0 {
description “MGMT INTERFACE – DO NOT DELETE”;
unit 0 {
family inet {
address 10.210.10.11/27;
}
}
}
lo0 {
unit 0 {
family inet {
address 192.168.100.1/32;
}
family iso {
address 49.1111.1921.6801.0001.00;
}
}
}
}
protocols {
isis {
interface ge-0/0/0.100;
interface ge-0/0/0.200;
}
}

A.    Interface lo0 must be configured in the IS-IS hierarchy.
B.    Each network interface needs a unique family ISO address.
C.    The IS-IS level for an each interface must be specified.
D.    The ISO address for interface lo0 is not in hex format.

Download PassLeader New Juniper JN0-370 Exam Dumps for Free in VCE and PDF (Question 121 – Question 140)

The newest Juniper JN0-370 dumps are available from PassLeader, you can get both JN0-370 VCE dumps and JN0-370 PDF dumps from PassLeader! PassLeader have added the newest JN0-370 exam questions into its JN0-370 VCE and PDF dumps now, the new JN0-370 braindumps will help you 100% passing the JNCIS-QF JN0-370 exam. Welcome to download the valid PassLeader JN0-370 dumps VCE and PDF here: https://www.passleader.com/jn0-370.html (281 Q&As Dumps)

Besides, download that PassLeader JN0-370 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpbzlHTmN4Q2VTV1U (FREE VERSION!!!)

QUESTION 121
You have two OSPF routers that are trying to form an adjacency. When you issue the command show ospf neighbor, you see that one router is in the loading state and the other is in the full state. Why are you seeing the router’s state as loading?

A.    The router does not know about the received LSA header and has transmitted a link-state request.
B.    The router has finished transmitting, but is still receiving database information.
C.    The router is waiting for a start event.
D.    The router has established bidirectional communication with its peer.

Recently Published Juniper JN0-370 Dumps from PassLeader with VCE and PDF (Question 101 – Question 120)

The newest Juniper JN0-370 dumps are available from PassLeader, you can get both JN0-370 VCE dumps and JN0-370 PDF dumps from PassLeader! PassLeader have added the newest JN0-370 exam questions into its JN0-370 VCE and PDF dumps now, the new JN0-370 braindumps will help you 100% passing the JNCIS-QF JN0-370 exam. Welcome to download the valid PassLeader JN0-370 dumps VCE and PDF here: https://www.passleader.com/jn0-370.html (281 Q&As Dumps)

Besides, download that PassLeader JN0-370 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpbzlHTmN4Q2VTV1U (FREE VERSION!!!)

QUESTION 101
What are two characteristics of a traditional Ethernet LAN? (Choose two.)

A.    Nodes share a physical medium.
B.    Nodes can successfully transmit simultaneously.
C.    It consists of a single broadcast domain.
D.    Nodes use a step-up algorithm when collisions are detected.

Pages: 1 2 3 4