The newest Juniper JN0-662 dumps are available from PassLeader, you can get both JN0-662 VCE dumps and JN0-662 PDF dumps from PassLeader! PassLeader have added the newest JN0-662 exam questions into its JN0-662 VCE and PDF dumps now, the new JN0-662 braindumps will help you 100% passing the JNCIP-SP JN0-662 exam. Welcome to download the valid PassLeader JN0-662 dumps VCE and PDF here: https://www.passleader.com/jn0-662.html (70 Q&As Dumps –> 115 Q&As Dumps)
Besides, download that PassLeader JN0-662 braindumps from Google Drive: https://drive.google.com/open?id=18okRParXHon70E6eiz4CYPCamBLZuDsV (FREE VERSION!!!)
NEW QUESTION 1
You want to add a new OSPF area to your existing OSPF network, however, this area will not be directly connected to Area 0. Which feature would you use to complete this task?
A. a routing policy
B. not-so stubby area
C. virtual link
D. Type 10 LSA
Answer: C
NEW QUESTION 2
Which statement is correct regarding BGP route reflectors?
A. The route reflectors must have a private AS number.
B. The route reflectors must have an EBGP peering session between each other.
C. The route reflectors must have a cluster ID configured.
D. The route reflectors must have a different AS number than the clients.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/nce/topics/example/routing-protocol-bgp-security-route-reflector-configuring-cli.html
NEW QUESTION 3
You are asked to deploy VPLS in your network as a new service for several customers, and you must identity the configuration and provisioning requirements for your customers. Which two statements are correct in this scenario? (Choose two.)
A. CE interfaces facing the service prowler must be Ethernet interfaces.
B. VLAN IDs defined on CE interfaces must be the same on both ends unless otherwise negotiated.
C. CE interfaces facing the service provider must be Layer 3 interfaces.
D. PE interfaces facing the core must have VPLS encapsulation enabled.
Answer: AB
NEW QUESTION 4
Which two LSA types are permitted in an OSPF stub area? (Choose two.)
A. Type 1
B. Type 2
C. Type 4
D. Type 5
Answer: AB
Explanation:
Stub areas can contain type 1, 2, and 3 LSAs. A default route is substituted for external routes.
NEW QUESTION 5
Which two routes use a proper route distinguisher? (Choose two.)
A. 192.168.0.1:12:10.1.0.0/16
B. 12345:12:10.1.0.0/16
C. 192.168.0.1:10.1.0.0:12/16
D. 12345:10.1.0.0:12/16
Answer: AB
NEW QUESTION 6
Which neighbor state indicates that two BGP neighbors have full connectivity?
A. Idle
B. Connect
C. OpenConfirm
D. Established
Answer: D
NEW QUESTION 7
Which two statements are correct regarding site IDs and circuit IDs in a VPLS routing instance? (Choose two.)
A. In an LDP VPLS routing instance, vpls-id parameters must be different in each location.
B. In an LDP VPLS routing instance, the vpls-id parameters must match in all locations.
C. In a BGP VPLS routing instance, the site-id parameters must be different in each location.
D. In a BGP VPLS routing instance, the site-id parameters must match in all locations.
Answer: BC
NEW QUESTION 8
You are configuring a BGP-signaled Layer 2 VPN service. Which two statements are true in this scenario? (Choose two.)
A. RSVP-signaled LSPs are required.
B. The family 12vpn auto-discovery-only parameter is required for BGP sessions.
C. The family 12vpn signaling parameter is required for BGP sessions.
D. RSVP-signaled or LDP-signaled LSPs may be used.
Answer: CD
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/example/mpls-ex-series-vpn-layer2.html
NEW QUESTION 9
You are troubleshooting a Layer 3 VPN issue. The VPN has been passing traffic successfully for some time, but now it is reported that traffic is no longer flowing. You look into the bgp.l3vpn.0 table and see newly hidden routes. What would be the cause of this problem?
A. The LSP used to connect the PE routers is down.
B. The connection from the PE to the customer is down.
C. The BGP routes received from the customer are no longer reachable.
D. The family inet-vpn parameter was deleted from the BGP configuration of the PE router.
Answer: D
NEW QUESTION 10
According to Juniper Networks, what are three methods of scaling Layer 2 VPNs? (Choose three.)
A. inbound route filters
B. route reflection
C. outbound route filters
D. filter-based forwarding
E. BGP route refresh
Answer: ABC
NEW QUESTION 11
Your company has multiple upstream BGP connections to the Internet through ISP-A, ISP-B, and ISP-C. You want to ensure that all traffic coming into your network uses ISP-A. How would you accomplish this task?
A. Change the route preference to be higher on routes being advertised to ISP-B and ISP-C.
B. Prepend your AS number on routes being advertised to ISP-A.
C. Change the local preference to be higher on routes being advertised to ISP-A.
D. Prepend your AS number on routes being advertised to ISP-B and ISP-C.
Answer: D
NEW QUESTION 12
How is a BGP Layer 2 VPN prefix formed by a PE?
A. By combining the route distinguisher and vrf-target, in that order.
B. By combining the route distinguisher, remote site identifier, and site identifier, in that order.
C. By combining the route distinguisher, site identifier, and remote site identifier, in that order.
D. By combining the vrf-target and route distinguisher, in that order.
Answer: C
NEW QUESTION 13
You want to reject routes from any BGP peers that have prepended their AS path. What is the correct as-path regex that would allow you to accomplish this task?
A. 65001.*
B. .{2,}
C. (65001|65001|65001)
D. .{0,1}
Answer: D
NEW QUESTION 14
Which two protocols are available in the Junos OS for the data plane encapsulation of EVPN traffic? (Choose two.)
A. MPLS
B. IPsec
C. VXLAN
D. GRE
Answer: AC
NEW QUESTION 15
……
Thanks for reading the newest JN0-662 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-662 dumps in VCE and PDF here: https://www.passleader.com/jn0-662.html (70 Q&As Dumps –> 115 Q&As Dumps)
Also, you can download that PassLeader JN0-662 braindumps from Google Drive: https://drive.google.com/open?id=18okRParXHon70E6eiz4CYPCamBLZuDsV (FREE VERSION!!!)
