New Juniper Exam Dumps from PassLeader
http://www.juniperbraindumps.com/data-center-design-specialist-jncds-dc-jn0-1300-exam-questions-with-vce-and-pdf-for-free-download-from-passleader-question-16-question-20.html
Export date: Sun Apr 5 16:44:37 2020 / +0000 GMT

Data Center Design, Specialist (JNCDS-DC) JN0-1300 Exam Questions with VCE and PDF for Free Download from PassLeader (Question 16 - Question 20)


The newest Juniper JN0-1300 dumps are available from PassLeader, you can get both JN0-1300 VCE dumps and JN0-1300 PDF dumps from PassLeader! PassLeader have added the newest JN0-1300 exam questions into its JN0-1300 VCE and PDF dumps now, the new JN0-1300 braindumps will help you 100% passing the JNCDS-DC JN0-1300 exam. Welcome to download the valid PassLeader JN0-1300 dumps VCE and PDF here: https://www.passleader.com/jn0-1300.html (70 Q&As Dumps)

Besides, download that PassLeader JN0-1300 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpVHBDOUNKUzNUbU0 (FREE VERSION!!!)

QUESTION 16
You are about to deploy the Cloud Analytics Engine in your data center. However, some of the devices in your data center are not supported by the Cloud Analytics Engine. In this scenario, which two actions would occur? (Choose two.)

A.    The QFX Series devices report more than the IP address and hop number.
B.    The EX Series devices report more than the IP address and hop number.
C.    The non-Junos devices report more than the IP address and hop number.
D.    The MX Series devices only report the IP address and hop number.

Answer: BD

QUESTION 17
Your customer has decided to implement a Layer 3 Clos IP fabric in their data center. They want to use IBGP and avoid using the full mesh requirement in this deployment scenario. Which two actions would accomplish this task? (Choose two.)

A.    Use well-known communities on all advertised routes.
B.    Use BGP confederations.
C.    Use AS path prepend policies.
D.    Use route reflection within the design.

Answer: BD

QUESTION 18
A customer's data center is built with a QFX3000-G composed of four QFX3008-I Interconnects, four QFX5100-48S nodes in the network Node group, and 20 QFX5100-48S nodes spread in 10 redundant server Node groups. There are host systems (FCoE clients) scattered everywhere throughout the data center. In this scenario, where should the FCoE-to-FC gateway(s) be placed?

A.    QFX3500s must be placed into the network Node group to provide a centralized FC-to-FCoE gateway.
B.    QFX3500s must be placed external to the QFX3000-G to provide an external FC-to-FCoE gateway.
C.    QFX3500s must be placed directly attached to the QFX3008-I Interconnects as a new Fibre Channel Node group to provide a centralized FC-to-FCoE gateway.
D.    Every Node which has FCoE client servers must become its own FC-to-FCoE gateway to provide a distributed FC-to-FCoE gateway.

Answer: A

QUESTION 19
The QFX5100 can be configured to be a virtual tunnel endpoint (VTEP) in your Clos IP fabric. What is the importance of this capability?

A.    It allows the QFX5100 to perform the PE role of an EVPN.
B.    It allows attached bare metal servers to communicate using an overlay VXLAN network.
C.    It prevents the QFX5100 from learning the MAC addresses of an overlay network.
D.    It allows the QFX5100 to perform the PE role of a Layer 2 pseudowire.

Answer: B

QUESTION 20
A customer wants to implement redundancy in the core and at the edge with a single IP address for management in their data center. They have 200 servers dual-homed with two 10 Gbps fiber ports, and two 1 Gbps copper ports for management and testing. In addition, they have a redundant iSCSI array with two 40 Gbps ports each. In this scenario, which solution meets the customer's requirements?

A.    A QFabric system using QFX3000-M with two QFX3600-Is, two QFX3008 Directors, along with eight EX4300-48Ts, and nine QFX5100-48Ss as node devices.
B.    A Virtual Chassis Fabric solution consisting of two QFX-5100-24Q as spine nodes and the leaf nodes consisting of eight EX4300-48Ts and nine QFX5100-48Ss operating in mix mode VCF.
C.    A dual core switch design with two EX9208s in an MC-LAG architecture with nine dual-homed QFX5100-48Ss and eight dual-homed EX4300-48Ts.
D.    A Virtual Chassis solution consisting of one Virtual Chassis with nine QFX5100-48Ss and one Virtual Chassis with eight EX4300-48Ts.

Answer: D


Thanks for reading the newest JN0-1300 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-1300 dumps in VCE and PDF here: https://www.passleader.com/jn0-1300.html (70 Q&As Dumps)

Also, you can download that PassLeader JN0-1300 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpVHBDOUNKUzNUbU0 (FREE VERSION!!!)

Post date: 2018-07-23 08:46:13
Post date GMT: 2018-07-23 08:46:13

Post modified date: 2018-07-23 08:46:13
Post modified date GMT: 2018-07-23 08:46:13

Export date: Sun Apr 5 16:44:37 2020 / +0000 GMT
This page was exported from New Juniper Exam Dumps from PassLeader [ http://www.juniperbraindumps.com ]
Export of Post and Page has been powered by [ Universal Post Manager ] plugin from www.ProfProjects.com