The newest Juniper JN0-680 dumps are available from PassLeader, you can get both JN0-680 VCE dumps and JN0-680 PDF dumps from PassLeader! PassLeader have added the newest JN0-680 exam questions into its JN0-680 VCE and PDF dumps now, the new JN0-680 braindumps will help you 100% passing the JNCIP-DC JN0-680 exam. Welcome to download the valid PassLeader JN0-680 dumps VCE and PDF here: https://www.passleader.com/jn0-680.html (67 Q&As Dumps)
Besides, download that PassLeader JN0-680 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpNjJ1YWhaVXJseWc (FREE VERSION!!!)
QUESTION 36
A customer has a 3-stage Clos architecture with three spine devices as shown in the exhibit. If a single spine device fails, what percentage of the remaining bandwidth will be available from leaf node to leaf node?
A. approximately 25%
B. approximately 75%
C. approximately 33%
D. approximately 66%
Answer: D
Explanation:
Leaf-to-leaf communication has 3 paths via each Spine node; lose 1 Spine, lose 1 path, i.e. 33%.
QUESTION 37
Referring to the exhibit, which hardware change would be made to the IP Fabric to ensure an exact 4:1 oversubscription ratio?
A. Upgrade the fabric links to 100GbE.
B. Add two leaf nodes to the IP Fabric.
C. Add three leaf nodes to the IP Fabric.
D. Add a spine node to the IP Fabric.
Answer: D
Explanation:
Leaf = 480 Gbps southbound, 80 Gbps northbound; 480/80 = 6:1. Add a spine and northbound capacity is 120 Gbps; 480/120 = 4:1.
http://www.brocade.com/content/html/en/solution-design-guide/brocade-dc-fabric-architectures-sdg/GUID-A0E2AF7F-C47A-458D-989A-35EC97E262DD.html
QUESTION 38
A customer has built a VXLAN using an EVPN signaling infrastructure with remote facilities with VXLAN using EVPN signaling connected to the Internet. The customer notices that the network is completely stable with no protocol errors in the underlay or overlay. The customer, however, cannot pass any application data across the network. Which statement would explain the intermittent loss?
A. There is an LACP key mismatch.
B. The MTU is exceeded.
C. The routing protocol authentication has failed.
D. The BPDU protection is invoked.
Answer: D
QUESTION 39
You have deployed a multicast server attached to a QFX5100 Series device serving as a VTEP. Which two statements are correct in this scenario? (Choose two.)
A. By default, the QFX5100 will send copies of the multicast packets to all locally attached devices in the same VLAN.
B. By default, the QFX5100 will send copies of the multicast packets to locally attached devices in the same VLAN that are interested receivers only.
C. By default, the QFX5100 will encapsulate the multicast packets in VXLAN and forward them to all remotely connected VTEPs.
D. By default, the QFX5100 will encapsulate the multicast packets in VXLAN and forward them to remotely connected VTEPs with interested receives only.
Answer: AC
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/sdn-vxlan.html#jd0e168
QUESTION 40
Which protocol is used between VCF member devices to create a loop-free topology?
A. LLDP
B. MSTP
C. RSTP
D. VCCP
Answer: D
Explanation:
http://www.juniper.net/documentation/en_US/release-independent/vcf/information-products/pathway-pages/vcf-best-practices-guide.pdf
Thanks for reading the newest JN0-680 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-680 dumps in VCE and PDF here: https://www.passleader.com/jn0-680.html (67 Q&As Dumps)
Also, you can download that PassLeader JN0-680 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpNjJ1YWhaVXJseWc (FREE VERSION!!!)
