The newest Juniper JN0-360 dumps are available from PassLeader, you can get both JN0-360 VCE dumps and JN0-360 PDF dumps from PassLeader! PassLeader have added the newest JN0-360 exam questions into its JN0-360 VCE and PDF dumps now, the new JN0-360 braindumps will help you 100% passing the JNCIS-SP JN0-360 exam. Welcome to download the valid PassLeader JN0-360 dumps VCE and PDF here: https://www.passleader.com/jn0-360.html (372 Q&As Dumps)
Besides, download that PassLeader JN0-360 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnN5YmVFZ194RmwtOUJlWkVoSmV3RzNUcUhpYjlmU1U3NEVyYUxHQWdjMms (FREE VERSION!!!)
You have been asked to use a convention that allows for auto configuration of interface addresses. You are not allowed to use DHCPv6. What do you do?
A. Use IPv4 with the autoconfig option under family inet.
B. Use IPv6 in the network to configure hosts.
C. Use a program (e.g. Vector-Wiz) to auto configure IP addresses.
D. Use an IPv6 static configuration.
You notice that the RID of your router is being taken from the address of your management interface. What could cause this scenario?
A. The loopback address was configured with a /32 address.
B. The loopback address was not configured under [edit protocols ospf].
C. A suitable loopback address was not configured on the router.
D. The loopback address was configured under [edit routing-options].
You have been asked to identify what the contributing routes are for route 204.7.15/21.Which command will show this information?
A. show route 204.7.15/21
B. show route 204.7.15/21 extended
C. show route 204.7.15/21 exact summary
D. show route 204.7.15/21 detail
Which packet type does the router use to request up-to-date link-state information?
Which forwarding table designation is used to indicate that load balancing is working correctly?
Which two statements are correct regarding VPLS mesh groups? (Choose two.)
A. Unicast packets destined to another PE router within the same mesh group are dropped by the local PE router.
B. Unicast packets destined to another PE router in a different mesh group are dropped by the local PE router.
C. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all local CE routers.
D. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all remote PE routers.
Router A receives two similar route advertisements from different BGP peers.What would cause a route to be selected in this scenario?
A. having a lower MED value
B. having a lower local preference
C. learning a route from a peer with a higher peer ID
D. learning a route from a peer with a higher IGP metric
Which two configuration elements must match on all switches participating in the same MSTP region? (Choose two.)
A. These routes are internal Level 1 routes.
B. These routes are internal Level 2 routes.
C. These routes are external Level 1 routes.
D. These routes are external Level 2 routes.
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
A. Nodes share a physical medium.
B. Nodes can successfully transmit simultaneously.
C. It consists of a single broadcast domain.
D. Nodes use a step-up algorithm when collisions are detected.
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the locally connected CE router’s interface. The address of the interface is 192.168.1.1; the VPN routing-instance is named VPN-A.Which command will accomplish this task?
A. ping routing-instance VPN-A 192.168.1.1
B. ping instance VPN-A 192.168.1.1
C. ping vpn-instance VPN-A 192.168.1.1
D. ping VPN-A 192.168.1.1
E. ping mpls l3vpn VPN-A 192.168.1.1
A. The address is not in the aggregate range; the packet is sent to the Routing Engine.
B. The address is in the aggregate range; the packet will be silently dropped.
C. The address is not in the aggregate range; the packet will be forwarded.
D. The address is in the aggregate range; the packet will be dropped.
Before configuring an RSVP LSP in your network, you first apply a baseline configuration to all of the routers.Which three configuration elements are minimally required in the baseline? (Choose three.)
A. family mpls on the loopback interface
B. family mpls on the transit interfaces
C. protocols ldp for the appropriate interfaces
D. protocols mpls for the appropriate interfaces
E. protocols rsvp for the appropriate interfaces
Your customer complains that their Layer 3 VPN is not passing traffic from one site to another. You assigned that customer to VPN-A. Which command on the PE router will confirm the presence of customer routes?
A. show route VPN-A
B. show route VPN-A table bgp.l2vpn.0
C. show route table inet.3 VPN-A
D. show route table VPN-A.inet.0
In an IS-IS network, which device represents the pseudo-node?
A. a designated intermediate system
B. an area border router
C. a router with an IS-IS export policy
D. a router connected to the backbone
Router B is an OSPF router connected to both Area 0 and Area 2. Area 2 has been configured as a totally stubby area.Which three LSA types does Router B suppress from Area 2? (Choose three.)
A. Router LSA
B. Network LSA
C. External LSA
D. Summary LSA
E. ASBR Summary LSA
What is the size of the unique address used to identify each node on an Ethernet LAN?
A. 3 bytes
B. 6 bytes
C. 9 bytes
D. 12 bytes
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)
You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route table.Which two commands would be used to help identify the source of the problem? (Choose two.)
A. show route bgp
B. show route protocol bgp hidden
C. show route receive-protocol bgp 192.168.1.1
D. show route advertising-protocol bgp 192.168.1.1
What are three ways to configure IPv6 addresses in your network? (Choose three.)
A. Statically configure your IPv6 addresses.
B. Configure your IPv6 addresses using stateless auto configuration.
C. Configure your IPv6 addresses by setting up a DHCPv6 server.
D. Configure your IPv6 addresses by assigning your router a prefix list.
E. Configure your IPv6 addresses by configuring support for unicast-arp-negotiation.
A. BGP routes learned from Router A only
B. BGP routes learned from Router D only
C. BGP routes learned from Routers A and C only
D. BGP routes learned from Routers A, C, and D only
In your RSVP network you have configured three separate LSPs to the same egress address. You have made no other configuration changes to the forwarding decisions made by the router.Which commands can you use to determine which LSP is being used to forward packets?
A. show route table inet.3
B. show route table inet.4
C. show rsvp neighbor
D. show rsvp session
Which two values are used by an RSTP bridge to remove stale BPDU information? (Choose two.)
A. Message Age
B. Forwarding Delay
C. Hello Time
D. Max Age
A. They are flooded.
B. The are forwarded to the default gateway.
C. They are dropped.
D. They are forwarded to the IRB interface.
You have recently configured MSTP on two switches in your network to participate in the same MSTP region. You issue the show spanning-tree mstp configuration command on both switches and notice that the configuration digests do not match.What does this mismatch indicate?
A. Everything is functioning as expected because the configuration digests should not match.
B. You should ensure that the max-age and hello timers are equal on both switches.
C. You should ensure that the bridge IDs and priority values are unique on both switches.
D. You should ensure that the MSTIs and their VLAN IDs are equal on both switches.
You have a stub OSPF area running in your network. Your supervisor has asked you to build a virtual link across this area to connect new equipment acquired in a recent ISP acquisition.Which statement is correct about this scenario?
A. Type 5 LSAs would be blocked in a stub area.
B. Type 5 LSAs would carry external information across your transit area to the backbone.
C. Type 5 LSAs would be seen only in the newly attached area.
D. Type 5 LSAs would be converted to type 7 LSAs.
You own a small company and need to assign IPv6 addresses to your routers. Because you want to follow the guidelines spelled out in RFC 3177, you want to design your network with the correct prefixes.Which prefix would your ISP likely allocate to your company?
A. 47-bit prefix
B. 48-bit prefix
C. 64-bit prefix
D. 128-bit prefix
Your customer would like to forward traffic using DLCI 600 and maintain Layer 2 information across a VPN.Which solution will meet these requirements?
A. a Layer 3 VPN
B. a Layer 2 VPN
C. Virtual Private LAN Service (VPLS)
D. an IPsec VPN
You have two OSPF routers that are trying to form an adjacency. When you issue the command show ospf neighbor, you see that one router is in the loading state and the other is in the full state.Why are you seeing the router’s state as loading?
A. The router does not know about the received LSA header and has transmitted a link-state request.
B. The router has finished transmitting, but is still receiving database information.
C. The router is waiting for a start event.
D. The router has established bidirectional communication with its peer.
Thanks for reading the newest JN0-360 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-360 dumps in VCE and PDF here: https://www.passleader.com/jn0-360.html (372 Q&As Dumps)
Also, you can download that PassLeader JN0-360 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnN5YmVFZ194RmwtOUJlWkVoSmV3RzNUcUhpYjlmU1U3NEVyYUxHQWdjMms (FREE VERSION!!!)