The newest Juniper JN0-360 dumps are available from PassLeader, you can get both JN0-360 VCE dumps and JN0-360 PDF dumps from PassLeader! PassLeader have added the newest JN0-360 exam questions into its JN0-360 VCE and PDF dumps now, the new JN0-360 braindumps will help you 100% passing the JNCIS-SP JN0-360 exam. Welcome to download the valid PassLeader JN0-360 dumps VCE and PDF here: https://www.passleader.com/jn0-360.html (372 Q&As Dumps)
Besides, download that PassLeader JN0-360 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnN5YmVFZ194RmwtOUJlWkVoSmV3RzNUcUhpYjlmU1U3NEVyYUxHQWdjMms (FREE VERSION!!!)
What is contained in an IS-IS CSNP message?
A. all of the headers of the LSPs in a router’s link-state database
B. all of the IP routes in a router’s link-state database
C. all of the IP routes in a router’s routing table
D. all of the LSPs in a router’s link-state database
You want to ensure that your RSVP LSPs are following a particular path across the network. Which RSVP object ensures that your desire will be met?
A. explicit route object
B. record route object
C. session object
D. traffic specification object
Which statement is true about the operation of Layer 2 VPNs?
A. Layer 2 VPNs require that CE devices use the same Layer 2 encapsulation
B. Layer 2 VPNs do not permit CE devices to operate a Layer 3 protocol with each other
C. Service provider routers must evaluate the IP header of packets as they traverse their network
D. Layer 2 VPNs allow CEs to use different encapsulations on either side of the VPN
Based on the illustration shown in the exhibit, what would PE-B do with a VPLS packet received from PE-A if the matching entry in its VPLS routing table showed the destination was connected to PE-D?
A. PE-B would flood the packet to all attached PEs
B. PE-B would forward the packet to the root PE device
C. PE-B would forward the packet to all attached CE devices
D. PE-B would discard the packet
A. monitor file isis-log
B. monitor start isis-log
C. monitor log isis-log
D. monitor syslog isis-log
A. broadcast domains
C. bridge domains
D. encapsulation type
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain By default. Which two tasks does the bridge perform in response to receiving a multicast frame? (Choose two.)
A. It learns the source MAC address
B. It drops the frame
C. It floods the frame out of all interfaces except the one on which it was received
D. It floods the frame out of particular interfaces based on its multicast MAC table
A. Option A
B. Option B
C. Option C
D. Option D
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the remotely connected CE router’s loopback address. The address of the loopback is 220.127.116.11, the VPN routing-instance is called VPN-C.Which command will accomplish this goal?
A. ping instance VPN-C 18.104.22.168
B. ping routing-instance VPN-C 22.214.171.124
C. ping VPN-C 126.96.36.199
D. ping vpn-instance VPN-C 188.8.131.52
You have two routers connected over a Gigabit Ethernet link as shown in the exhibit It is required that an IS-IS adjacency be established without the need for a designated intermediate system (DIS).
Which configuration statement entered on both routers will achieve this goal?
A. set interface ge-0/0/2 unit 0 family iso no-dis
B. set interface ge-0/0/2 unit 0 family iso point-to-point
C. set protocols isis interface ge-0/0/2.0 no-dis
D. set protocols isis interface ge-0/0/2.0 point-to-point
Which two problems occur when increasing numbers of users are added to an Ethernet LAN with no switches present? (Choose two.)
A. There is a greater chance for collisions to occur
B. The MAC table sizes increase
C. Some devices will not see certain traffic
D. There is unnecessary consumption of network bandwidth
A. BGP routes learned from Router A only
B. BGP routes learned from Router E only
C. BGP routes learned from Routers A and C only
D. BGP routes learned from Routers A, C and E only
Given the OSPF network topology shown in the exhibit, you would like to inject external (non- OSPF) routes into the network on Router D.
Which two OSPF area types will support this configuration? (Choose two.)
A. stub area
B. totally stubby area
C. not-so-stubby area
D. non-backbone area
In your network, you have two LDP routers connected across four physical interfaces. You have also enabled LDP to operate on all four of those interfaces. What is the resulting outcome of your configuration between those two routers?
A. One session is built across one neighbor relationship
B. One session is built across four neighbor relationships
C. Four sessions are built across one neighbor relationship
D. Four sessions are built across four neighbor relationships
By default, which RSVP reservation style is used by the Junos OS?
A. fixed explicit
B. fixed filter
C. shared explicit
D. wildcard filter
Which three statements are true about BGP? (Choose three.)
A. iBGP peering adds value in small networks with a single upstream connection
B. iBGP peering adds value in small networks with multiple upstream connections
C. eBGP peering adds value in small networks with multiple upstream connections
D. iBGP peering adds value in large enterprise environments with multiple upstream connections
E. eBGP peering adds value in large enterprise environments with multiple upstream connections
You observe that VPN routes are hidden on your PE router Which situation accounts for these hidden routes?
A. The protocol next-hop is not found in inet.3
B. The protocol next-hop is not found in mpls 0
C. The protocol next-hop is not found in bgp I3vpn 0
D. The protocol next-hop is not found in inet 2
To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)
B. source port
C. destination port
D. source address
E. destination address
A. Level 1 is enabled and Level 2 is disabled.
B. Level 1 is disabled and Level 2 is enabled.
C. Level 1 is enabled and Level 2 is enabled.
D. Level 1 is disabled and Level 2 is disabled.
A. Frames will be counted initially by filterB and then counted by filterA.
B. Frames will be counted initially by filterA and then counted by filterB.
C. Frames will be counted by filterA only.
D. Frames will be counted by filterB only.
A. The first address is complete and correct.
B. The third address is not formatted correctly.
C. All three addresses are the same.
D. The second address is incomplete and not correct.
You have just configured IPv6 in your network. A packet arrives on your router that exceeds the MTU size. How will an IPv6 router respond?
A. The fragment offset is referenced and the packet is fragmented.
B. The packet is kept intact and not fragmented.
C. The packet is dropped.
D. The packet is fragmented based on extension headers.
Which two statements reflect benefits of performing per-flow load balancing over per-packet load balancing? (Choose two.)
A. All physical links in the network are used equally.
B. Packets arrive at the destination in the order they were sent.
C. Provides easier implementation of class of service policies.
D. Allows the destination host to re-order packets and increase performance.
By default, the Junos OS advertises which address(es) in LDP forwarding equivalency class (FEC) messages?
A. all router addresses
B. all transit interfaces
C. loopback address
D. primary transit interface address
A. encapsulation vlan-bridge
B. encapsulation ethernet-bridge
C. interface-mode trunk
D. vlan-id-range [100 200]
What are three valid BGP message types? (Choose three.)
What are two benefits of using an OSPF designated router (DR)? (Choose two.)
A. Reduces the size of the link-state database.
B. Reduces LSA flooding on a broadcast segment.
C. Reduces LSA flooding throughout an OSPF area.
D. Reduces router resources used.
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)
A. This command can only be issued on the master Routing Engine.
B. This command displays the status of graceful switchover.
C. This command can only be issued on the backup Routing Engine.
D. This command displays the status of the interface and process databases.
E. This command displays the status of the kernel database.
Thanks for reading the newest JN0-360 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-360 dumps in VCE and PDF here: https://www.passleader.com/jn0-360.html (372 Q&As Dumps)
Also, you can download that PassLeader JN0-360 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnN5YmVFZ194RmwtOUJlWkVoSmV3RzNUcUhpYjlmU1U3NEVyYUxHQWdjMms (FREE VERSION!!!)