Download PassLeader New Juniper JN0-370 Exam Dumps for Free in VCE and PDF (Question 121 – Question 140)

The newest Juniper JN0-370 dumps are available from PassLeader, you can get both JN0-370 VCE dumps and JN0-370 PDF dumps from PassLeader! PassLeader have added the newest JN0-370 exam questions into its JN0-370 VCE and PDF dumps now, the new JN0-370 braindumps will help you 100% passing the JNCIS-QF JN0-370 exam. Welcome to download the valid PassLeader JN0-370 dumps VCE and PDF here: https://www.passleader.com/jn0-370.html (281 Q&As Dumps)

Besides, download that PassLeader JN0-370 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpbzlHTmN4Q2VTV1U (FREE VERSION!!!)

QUESTION 121
You have two OSPF routers that are trying to form an adjacency. When you issue the command show ospf neighbor, you see that one router is in the loading state and the other is in the full state. Why are you seeing the router’s state as loading?

A.    The router does not know about the received LSA header and has transmitted a link-state request.
B.    The router has finished transmitting, but is still receiving database information.
C.    The router is waiting for a start event.
D.    The router has established bidirectional communication with its peer.

Answer: B

QUESTION 122
Which two events could cause the BGP Active state to appear? (Choose two.)

A.    The local router does not have a route to the peer device.
B.    The local router failed to establish a TCP connection with the peer device.
C.    A firewall is stopping all UDP packets.
D.    The BGP configuration is incomplete.

Answer: BD

QUESTION 123
passleader-JN0-370-dumps-1231
The policy shown in the exhibit has been configured and installed on your router. What is the result of applying this policy?

A.    The 172.18.1.0/24 network will be redistributed into OSPF as an external route.
B.    The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
C.    The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
D.    The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.

Answer: A

QUESTION 124
Which type of router can provide connectivity between areas in an IS-IS domain?

A.    a Level 1 router with adjacencies within a single area
B.    a Level 2 router with adjacencies in more than one area
C.    an area border router with adjacencies in more than one area
D.    a Level 2 router with adjacencies in a single area

Answer: B

QUESTION 125
You have been asked to provision a service provider’s network to accommodate Layer 3 VPNs as defined in RFC 4364. Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)

A.    All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.
B.    All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.
C.    All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
D.    All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
E.    All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.

Answer: BDE

QUESTION 126
By default, which BGP attribute is only compared when two route advertisements are received from the same neighboring AS?

A.    MED
B.    AS-Path
C.    Communities
D.    Next Hop

Answer: A

QUESTION 127
passleader-JN0-370-dumps-1271
Referring to the exhibit, what must be true of the vlan_100 bridge domain?

A.    vlan_100 has at least one Ethernet interface assigned to it.
B.    vlan_100 does not have an Ethernet interface assigned to it.
C.    vlan_100 might have an active Ethernet interface assigned to it.
D.    vlan_100 does not have an active Ethernet interface assigned to it.

Answer: D

QUESTION 128
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain. Which two tasks does the bridge perform in response to receiving a frame with an unknown unicast destination MAC address? (Choose two.)

A.    It drops the frame.
B.    It floods the frame out of all interfaces except the one on which is was received.
C.    It learns the destination MAC address.
D.    It learns the source MAC address.

Answer: BD

QUESTION 129
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites. Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

A.    path MTU discovery
B.    fragmentation discovery
C.    end-to-end MTU discovery
D.    packet throughput discovery

Answer: A

QUESTION 130
You have configured an RSVP LSP in your network and have assigned it one primary and two secondary paths. Which command is used to validate that the LSP is using the primary path?

A.    show rsvp interface
B.    show rsvp version
C.    show rsvp neighbor detail
D.    show rsvp session detail

Answer: D

QUESTION 131
What are two uses of the AS-path attribute? (Choose two.)

A.    It is used in BGP route selection.
B.    It is used to ensure that a packet traverses the least number of routers.
C.    It is used by IGPs to avoid loops within an autonomous system.
D.    It is used to avoid routing loops between autonomous systems.

Answer: AD

QUESTION 132
Which IS-IS packet is used to carry routing updates?

A.    IIH
B.    LSP
C.    PSNP
D.    CSNP

Answer: B

QUESTION 133
Which three statements is true regarding the show system switchover operational mode command? (Choose three.)

A.    This command can only be issued on the master Routing Engine.
B.    This command displays the status of graceful switchover.
C.    This command can only be issued on the backup Routing Engine.
D.    This command displays the status of the interface and process databases.
E.    This command displays the status of the kernel database.

Answer: BCE

QUESTION 134
Which three elements contribute to the bridge ID when configuring RSTP? (Choose three.)

A.    designated MAC address
B.    priority
C.    extended system ID
D.    root ID
E.    bridge address

Answer: BCE

QUESTION 135
Which LDP message is used to transmit labels and forwarding equivalency class (FEC) information?

A.    advertisement
B.    discovery
C.    notification
D.    session

Answer: A

QUESTION 136
You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You have been asked to create a static route that will use 43.18.7.1 as its primary next-hop and 76.13.10.2 as its secondary next-hop. Which command correctly configures this setup?

A.    set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
B.    set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
C.    set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
D.    set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10

Answer: D

QUESTION 137
By default, which Junos routing table stores RSVP egress router information?

A.    inet.1
B.    inet.2
C.    inet.3
D.    inet.4

Answer: C

QUESTION 138
You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You have been asked to define an aggregate route for 172.30/16. Which command correctly configures this setup?

A.    set summary route 172.30/16
B.    set aggregate route 172.30/16
C.    set route aggregate 172.30/16
D.    set route summary 172.30/16

Answer: B

QUESTION 139
When sending BGP routes in an Update message, how are they grouped?

A.    by grouping aggregated address ranges together
B.    by using a complete set of matching attributes
C.    by the originating autonomous system
D.    by the originating router

Answer: B

QUESTION 140
passleader-JN0-370-dumps-1401
You work for the regional Internet service provider shown in the exhibit. You have a partial BGP table and are receiving a 10.100/16 route from your upstream ISP. You have been asked to configure a default route that can be sent to your downstream customer. This route should forward customer traffic toward your upstream Tier 1 ISP as long as the 10.100/16 route is present. What would accomplish this goal?

A.    Create and announce an aggregate default route.
B.    Create and announce a static default route with a next-hop of discard.
C.    Create and announce a static default route with a next-hop of reject.
D.    Create and announce a generated default route.

Answer: D


Thanks for reading the newest JN0-370 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-370 dumps in VCE and PDF here: https://www.passleader.com/jn0-370.html (281 Q&As Dumps)

Also, you can download that PassLeader JN0-370 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpbzlHTmN4Q2VTV1U (FREE VERSION!!!)