The newest Juniper JN0-370 dumps are available from PassLeader, you can get both JN0-370 VCE dumps and JN0-370 PDF dumps from PassLeader! PassLeader have added the newest JN0-370 exam questions into its JN0-370 VCE and PDF dumps now, the new JN0-370 braindumps will help you 100% passing the JNCIS-QF JN0-370 exam. Welcome to download the valid PassLeader JN0-370 dumps VCE and PDF here: https://www.passleader.com/jn0-370.html (281 Q&As Dumps)
Besides, download that PassLeader JN0-370 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpbzlHTmN4Q2VTV1U (FREE VERSION!!!)
A. Level 1 is enabled and Level 2 is disabled.
B. Level 1 is disabled and Level 2 is enabled.
C. Level 1 is enabled and Level 2 is enabled.
D. Level 1 is disabled and Level 2 is disabled.
A. Frames will be counted initially by filterB and then counted by filterA.
B. Frames will be counted initially by filterA and then counted by filterB.
C. Frames will be counted by filterA only.
D. Frames will be counted by filterB only.
A. The first address is complete and correct.
B. The third address is not formatted correctly.
C. All three addresses are the same.
D. The second address is incomplete and not correct.
You have just configured IPv6 in your network. A packet arrives on your router that exceeds the MTU size. How will an IPv6 router respond?
A. The fragment offset is referenced and the packet is fragmented.
B. The packet is kept intact and not fragmented.
C. The packet is dropped.
D. The packet is fragmented based on extension headers.
Which two statements reflect benefits of performing per-flow load balancing over per-packet load balancing? (Choose two.)
A. All physical links in the network are used equally.
B. Packets arrive at the destination in the order they were sent.
C. Provides easier implementation of class of service policies.
D. Allows the destination host to re-order packets and increase performance.
By default, the Junos OS advertises which address(es) in LDP forwarding equivalency class (FEC) messages?
A. all router addresses
B. all transit interfaces
C. loopback address
D. primary transit interface address
A. encapsulation vlan-bridge
B. encapsulation ethernet-bridge
C. interface-mode trunk
D. vlan-id-range [100 200]
What are three valid BGP message types? (Choose three.)
What are two benefits of using an OSPF designated router (DR)? (Choose two.)
A. Reduces the size of the link-state database.
B. Reduces LSA flooding on a broadcast segment.
C. Reduces LSA flooding throughout an OSPF area.
D. Reduces router resources used.
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)
A. This command can only be issued on the master Routing Engine.
B. This command displays the status of graceful switchover.
C. This command can only be issued on the backup Routing Engine.
D. This command displays the status of the interface and process databases.
E. This command displays the status of the kernel database.
You have been asked to use a convention that allows for auto configuration of interface addresses. You are not allowed to use DHCPv6. What do you do?
A. Use IPv4 with the autoconfig option under family inet.
B. Use IPv6 in the network to configure hosts.
C. Use a program (e.g. Vector-Wiz) to auto configure IP addresses.
D. Use an IPv6 static configuration.
You notice that the RID of your router is being taken from the address of your management interface. What could cause this scenario?
A. The loopback address was configured with a /32 address.
B. The loopback address was not configured under [edit protocols ospf].
C. A suitable loopback address was not configured on the router.
D. The loopback address was configured under [edit routing-options].
You have been asked to identify what the contributing routes are for route 204.7.15/21. Which command will show this information?
A. show route 204.7.15/21
B. show route 204.7.15/21 extended
C. show route 204.7.15/21 exact summary
D. show route 204.7.15/21 detail
Which packet type does the router use to request up-to-date link-state information?
Which forwarding table designation is used to indicate that load balancing is working correctly?
Which two statements are correct regarding VPLS mesh groups? (Choose two.)
A. Unicast packets destined to another PE router within the same mesh group are dropped by the local PE router.
B. Unicast packets destined to another PE router in a different mesh group are dropped by the local PE router.
C. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all local CE routers.
D. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all remote PE routers.
Router A receives two similar route advertisements from different BGP peers. What would cause a route to be selected in this scenario?
A. having a lower MED value
B. having a lower local preference
C. learning a route from a peer with a higher peer ID
D. learning a route from a peer with a higher IGP metric
Which two configuration elements must match on all switches participating in the same MSTP region? (Choose two.)
A. These routes are internal Level 1 routes.
B. These routes are internal Level 2 routes.
C. These routes are external Level 1 routes.
D. These routes are external Level 2 routes.
Thanks for reading the newest JN0-370 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-370 dumps in VCE and PDF here: https://www.passleader.com/jn0-370.html (281 Q&As Dumps)
Also, you can download that PassLeader JN0-370 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpbzlHTmN4Q2VTV1U (FREE VERSION!!!)