PassLeader Premium Juniper JNCIS-SP JN0-361 Exam Dumps in VCE and PDF for Free Previewing (Question 49 – Question 56)

The newest Juniper JN0-361 dumps are available from PassLeader, you can get both JN0-361 VCE dumps and JN0-361 PDF dumps from PassLeader! PassLeader have added the newest JN0-361 exam questions into its JN0-361 VCE and PDF dumps now, the new JN0-361 braindumps will help you 100% passing the JNCIS-SP JN0-361 exam. Welcome to download the valid PassLeader JN0-361 dumps VCE and PDF here: https://www.passleader.com/jn0-361.html (115 Q&As Dumps)

Besides, download that PassLeader JN0-361 braindumps from Google Drive: https://drive.google.com/open?id=1xx4HdZ_CTaUaTyfX_xp10wDN10jHXZPh (FREE VERSION!!!)

QUESTION 49
Referring to the exhibit.
passleader-JN0-361-dumps-491
On an MX Series device, you must enable routing between VLANs 100,200, and the Internet ge-5/1/0, and ge-5/1/2 are bundled into interface ae3. Ge-5/1/4, and ge-5/1/5 are bundles into interface ae2. Both AE bundles trunk VLANs 100 and 200. In this scenario, what is the correct configuration snippet for VLAN 100?

A.    interfaces {
xe-2/1/0 {
unit 0 {
family inter {
address 10.0.10.2/24;
}}
}
irb {
unit 0 {
family inet {address 10.0.1.2/24;
}}
unit 1 family inet {
address 10.0.2.2/24;
}}}}
bridge-domains {
vlan-100 {
domain-type bridge;
vlan-id 100;
interface ge-2/2/2.100;
interface ae1.100;
interface ae3.100;
routing-interface irb.0;
}}
B.    interfaces {
xe-2/1/0 {
unit 0 {
family inet {
address 10.0.10.2/24;
}}}
ip-0/0/0 {
unit 0 {
family inet {
address 10.0.1.2/24;
}}
unit 1 {
family inet {
address 10.0.2.2/24;
}}}}
bridge-domains {
vlan-100 {
domain-type bridge;
vlan-id 100;
interface ge-2/2/2.100;
interface ae1.100;
interface ae3.100;
interface ip-0/0/0.0;
}}
C.    interfaces {
xe-2/1/0 {
unit 0 {
family inet {
address 10.0.10.2/24;
}}}
irb {
unit 0 {family inet {
address 10.0.1.2/24:
}}
unit 1 {
family inet {
address 10.0.2.2/24;
}}}}
bridge-domains {
vlan-100 {
domain-type bridge;
vlan-id 100;
interface ge-2/2/2.100;
interface ae1.100;
interface ae3.100;
}}
D.    interfaces {
xe-2/1/0 {
unit 0 {
family inet {
address 10.0.10.2/24;
}}}
ip-0/0/0 {
unit 0 {
family inet {
address 10.0.1.2/24;
}}
unit 1 {
family inet {
address 10.0.2.2/24;
}}}}
bridge-domains {
vlan-100 {
domain-type bridge;
vlan-id 100;
interface ge-2/2/2.100;
interface xe-2/1/0.0;
interface ae1.100;
interface ae3.100
interface ip-0/0/0.0;
}}

Answer: C

QUESTION 50
You are configuring a default static route using the default preference value. You want to ensure that any static route that you configure in the future will be less preferred than the OSPF routes that are configured on the network. Which command will accomplish this task?

A.    set protocols ospf preference 6
B.    set routing-options static route <IP address> preference 9
C.    set routing-options static defaults preference 20
D.    set routing-options static defaults passive

Answer: C

QUESTION 51
Which two routing protocols make use of a designated router, or pseudo node, to represent a broadcast network? (Choose two.)

A.    BGP
B.    OSPF
C.    MPLS
D.    IS-IS

Answer: BD

QUESTION 52
Referring to the exhibit.
passleader-JN0-361-dumps-521
A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to route the VLANs or renumber the VLANs. Which two VLAN IDs are egressing the MX Series device towards the optical transport network after translation? (Choose two.)

A.    500
B.    501
C.    201
D.    200

Answer: AB

QUESTION 53
Which three statements are true about GRES? (Choose three.)

A.    Kernel information is preserved.
B.    Interface information is preserved.
C.    GRES requires only one RE.
D.    GRES requires redundant REs.
E.    Control plane information is preserved.

Answer: ABD

QUESTION 54
Referring to the exhibit.
passleader-JN0-361-dumps-541
What is the result of applying this policy?

A.    The 172.18.1.0/24 prefix will be redistributed into OSPF as an internal route.
B.    The 172.18.1.1/32 prefix will be redistributed into OSPF as an external route.
C.    The 172.18.1.0/24 prefix will be redistributed into OSPF as an external route.
D.    The 172.18.1.1/32 prefix will be redistributed into OSPF as an internal route.

Answer: C

QUESTION 55
Which two statements are correct regarding TLVs in IS-IS? (Choose two.)

A.    PDUs contain different TLVs.
B.    TLVs contain different PDUs.
C.    The TLV attributes are type, length, and value.
D.    The TLV attributes are time. Length, and variable.

Answer: AC

QUESTION 56
Referring to the exhibit.
passleader-JN0-361-dumps-561
passleader-JN0-361-dumps-562
passleader-JN0-361-dumps-563
Which route(s) will be exported to neighbor 192.168.1.2?

A.    100.0.1/32 and 100.0.20.1/32
B.    10.0.0.0/24, 11.0.0.0/24, 100.0.0.1/32, 100.0.20.1/32, and 192.168.1.1/32
C.    100.0.20.1/32, 192.168.1.1/32, and 100.0.0.1/32
D.    100.0.20.1/32

Answer: B


Thanks for reading the newest JN0-361 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-361 dumps in VCE and PDF here: https://www.passleader.com/jn0-361.html (115 Q&As Dumps)

Also, you can download that PassLeader JN0-361 braindumps from Google Drive: https://drive.google.com/open?id=1xx4HdZ_CTaUaTyfX_xp10wDN10jHXZPh (FREE VERSION!!!)