Passing Guarantee Juniper JN0-360 Dumps from PassLeader JN0-360 VCE and PDF for Free (Question 121 – Question 150)

The newest Juniper JN0-360 dumps are available from PassLeader, you can get both JN0-360 VCE dumps and JN0-360 PDF dumps from PassLeader! PassLeader have added the newest JN0-360 exam questions into its JN0-360 VCE and PDF dumps now, the new JN0-360 braindumps will help you 100% passing the JNCIS-SP JN0-360 exam. Welcome to download the valid PassLeader JN0-360 dumps VCE and PDF here: https://www.passleader.com/jn0-360.html (372 Q&As Dumps)

Besides, download that PassLeader JN0-360 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnN5YmVFZ194RmwtOUJlWkVoSmV3RzNUcUhpYjlmU1U3NEVyYUxHQWdjMms (FREE VERSION!!!)

QUESTION 121
Which two events could cause the BGP Active state to appear? (Choose two.)

A.    The local router does not have a route to the peer device.
B.    The local router failed to establish a TCP connection with the peer device.
C.    A firewall is stopping all UDP packets.
D.    The BGP configuration is incomplete.

Answer: BD

QUESTION 122
The policy shown in the exhibit has been configured and installed on your router.
passleader-JN0-360-dumps-1221
What is the result of applying this policy?

A.    The 172.18.1.0/24 network will be redistributed into OSPF as an external route.
B.    The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
C.    The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
D.    The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.

Answer: A

QUESTION 123
Which type of router can provide connectivity between areas in an IS-IS domain?

A.    a Level 1 router with adjacencies within a single area
B.    a Level 2 router with adjacencies in more than one area
C.    an area border router with adjacencies in more than one area
D.    a Level 2 router with adjacencies in a single area

Answer: B

QUESTION 124
You have been asked to provision a service provider’s network to accommodate Layer 3 VPNs as defined in RFC 4364.Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)

A.    All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.
B.    All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.
C.    All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
D.    All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
E.    All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.

Answer: BDE

QUESTION 125
By default, which BGP attribute is only compared when two route advertisements are received from the same neighboring AS?

A.    MED
B.    AS-Path
C.    Communities
D.    Next Hop

Answer: A

QUESTION 126
Referring to the exhibit, what must be true of the vlan_100 bridge domain?
passleader-JN0-360-dumps-1261

A.    vlan_100 has at least one Ethernet interface assigned to it.
B.    vlan_100 does not have an Ethernet interface assigned to it.
C.    vlan_100 might have an active Ethernet interface assigned to it.
D.    vlan_100 does not have an active Ethernet interface assigned to it.

Answer: A

QUESTION 127
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain.Which two tasks does the bridge perform in response to receiving a frame with an unknown unicast destination MAC address? (Choose two.)

A.    It drops the frame.
B.    It floods the frame out of all interfaces except the one on which is was received.
C.    It learns the destination MAC address.
D.    It learns the source MAC address.

Answer: BD

QUESTION 128
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites.Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

A.    path MTU discovery
B.    fragmentation discovery
C.    end-to-end MTU discovery
D.    packet throughput discovery

Answer: A

QUESTION 129
You are asked to design a Layer 2 VPN service between service provider networks that needs Ethernet transport capabilities. The VPN should support two or three endpoints. Which Layer 2 VPN technology should you propose?

A.    LDP-signaled VPLS
B.    BGP-signaled VPLS, using the RFC 4448 Layer 2 frame format
C.    LDP Layer 2 circuit, using the RFC 4448 Layer 2 frame format
D.    BGP Layer 2 VPN

Answer: B

QUESTION 130
You are adding nonforwarding route reflectors to your network. Which three actions ensure that VPN routes are advertised properly? (Choose three.)

A.    Use rib-groups to add IGP routes to inet.3 and/or inet6.3 on the route reflectors.
B.    Add MPLS LSPs between the route reflectors and their client routers.
C.    Add the route reflectors to the same IGP domain as their clients.
D.    Use rib-groups to add VPN routes to inet.0 and/or inet6.0 on the route reflectors.
E.    Add a static default route to inet.3 and/or inet6.3 on the route reflectors.

Answer: ABE

QUESTION 131
Which two statements describe advantages of using BGP for VPLS signaling instead of LDP signaling? (Choose two.)

A.    There is no need for MPLS signaling protocol.
B.    There is a well-defined scaling hierarchy.
C.    There is a separation of signaling from other services.
D.    There is auto discovery.

Answer: BD

QUESTION 132
Which statement is true about the operation of Layer 2 VPNs?

A.    Layer 2 VPNs require that CE devices use the same Layer 2 encapsulation
B.    Layer 2 VPNs do not permit CE devices to operate a Layer 3 protocol with each other
C.    Service provider routers must evaluate the IP header of packets as they traverse their network
D.    Layer 2 VPNs allow CEs to use different encapsulations on either side of the VPN

Answer: D

QUESTION 133
Which two statements are true when configuring OSPF authentication? (Choose two.)

A.    An OSPF link can support both simple password and MD5 authentication at the same time.
B.    An MD5 password requires a key ID.
C.    You can configure multiple MD5 passwords simultaneously on the same link.
D.    If the MD5 password negotiation fails, you can configure OSPF to automatically use a simple password as a backup.

Answer: BC

QUESTION 134
Which three statements are true about the BGP community attribute? (Choose three.)

A.    There are three well-known communities.
B.    Communities can be used to signal local preference in other AS networks.
C.    Only well-known communities can be passed between AS networks.
D.    Routing policies can be simplified using BGP communities.
E.    Communities are used in the route selection process.

Answer: ABD

QUESTION 135
An IS-IS level 1-only router is configured within a larger multilevel hierarchy. Which OSPF area type resembles the routing information in the L1 router’s table?

A.    OSPF default area
B.    OSPF stub area
C.    OSPF NSSA
D.    OSPF NSSA with no summaries

Answer: D

QUESTION 136
Which statement is true about IS-IS?

A.    IS-IS level 1 internal routes are announced to level 2 by default.
B.    All IS-IS level 1 routes are announced to level 2 by default.
C.    IS-IS level 2 internal routes are announced to level 1 by default.
D.    IS-IS does not share routes between level 1 and level 2 by default.

Answer: A

QUESTION 137
What does the Junos command advertise-inactive allow?

A.    OSPF inactive routes to be advertised using BGP
B.    inactive and hidden BGP routes to be redistributed into OSPF
C.    the best BGP route to be re-advertised by BGP, even when it is not the best route
D.    the second-best BGP route to be re-advertised by BGP, to back up the best BGP route

Answer: C

QUESTION 138
An LDP Layer 2 circuit is configured for VPN A and VPN B. Which three statements are true regarding LDP Layer 2 circuit signaling? (Choose three.)

A.    PE-P LDP sessions use Martini encapsulation.
B.    PE-PE LDP sessions can be extended or adjacent.
C.    VRF tables are needed on the PEs.
D.    TCC encapsulation is needed to interconnect different interface types.
E.    The VC type field in the LDP header specifies the encapsulation type.

Answer: BDE

QUESTION 139
Your are the administrator for a network that uses IS-IS as its IGP. As the network grows, you find that the protocol’s default capabilities for setting metrics is limiting your options. Which feature can you implement to provide a larger range of metric configuration capabilities?

A.    extended metrics
B.    wide metrics
C.    expanded metrics
D.    full metrics

Answer: B

QUESTION 140
You are monitoring the control plane traffic using a network analyzer on an Ethernet network segment with all routers configured with IS-IS routing. Which two statements are true? (Choose two.)

A.    DIS will send hellos more frequently than other IS-IS devices.
B.    L1 and L2 hellos are combined in a single hello packet.
C.    PSNPs are sent periodically.
D.    Only the DIS will send CSNPs periodically.

Answer: AD

QUESTION 141
BGP AS-PATH is ____. (Choose two.)

A.    one of BGP route selection process
B.    prevent loop in one Autonomous System
C.    prevent loop between Autonomous Systems

Answer: AC

QUESTION 142
Protocol
Isis {
interface lo0.0
interface ge-0/0/0.0
}
What is the level of IS-IS router?

A.    level 1 only
B.    level 2 only
C.    level 1, level 2
D.    level 1, level 2, level 3

Answer: C

QUESTION 143
Router A has external peer 10.1.20.1 and many internal peers , we have the following policy:
Policy-options policy-statement nhs
term 1
{   from      protcol bgp
neighbor 10.1.20.1
Then next-hop self
}
What’s policy should be apply for the route seclection in BGP is valid?

A.    policy should apply for external peer as import
B.    policy should apply for external peer as export
C.    policy should apply for internal peer as export
D.    policy should apply for internal peer as import

Answer: C

QUESTION 144
Show interface on Junos platform.
passleader-JN0-360-dumps-1441
What is true about the two ipv6 address on interface ge0/0/0?

A.    two address is site-local and link-local ipv6 address

Answer: A

QUESTION 145
We use rsvp to built three LSP path, one primary LSP and two other backup LSP, which command to show which LSP path has been used to foward traffic?

A.    show rsvp interface
B.    show rsvp neighbor detail
C.    show session rsvp detail

Answer: C

QUESTION 146
Which ldp packet use to sending FEC information?

A.    Discovery
B.    Session
C.    Advertisement
D.    Notification

Answer: C

QUESTION 147
You have configured an RSVP LSP in your network and have assigned it one primary and two secondary paths. Which command is used to validate that the LSP is using the primary path?

A.    show rsvp interface
B.    show rsvp version
C.    show rsvp neighbor detail
D.    show rsvp session detail

Answer: D

QUESTION 148
What are two uses of the AS-path attribute? (Choose two.)

A.    It is used in BGP route selection.
B.    It is used to ensure that a packet traverses the least number of routers.
C.    It is used by IGPs to avoid loops within an autonomous system.
D.    It is used to avoid routing loops between autonomous systems.

Answer: AD

QUESTION 149
Which IS-IS packet is used to carry routing updates?

A.    IIH
B.    LSP
C.    PSNP
D.    CSNP

Answer: B

QUESTION 150
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)

A.    This command can only be issued on the master Routing Engine.
B.    This command displays the status of graceful switchover.
C.    This command can only be issued on the backup Routing Engine.
D.    This command displays the status of the interface and process databases.
E.    This command displays the status of the kernel database.

Answer: BCE


Thanks for reading the newest JN0-360 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-360 dumps in VCE and PDF here: https://www.passleader.com/jn0-360.html (372 Q&As Dumps)

Also, you can download that PassLeader JN0-360 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnN5YmVFZ194RmwtOUJlWkVoSmV3RzNUcUhpYjlmU1U3NEVyYUxHQWdjMms (FREE VERSION!!!)