The newest Juniper JN0-360 dumps are available from PassLeader, you can get both JN0-360 VCE dumps and JN0-360 PDF dumps from PassLeader! PassLeader have added the newest JN0-360 exam questions into its JN0-360 VCE and PDF dumps now, the new JN0-360 braindumps will help you 100% passing the JNCIS-SP JN0-360 exam. Welcome to download the valid PassLeader JN0-360 dumps VCE and PDF here: https://www.passleader.com/jn0-360.html (372 Q&As Dumps)
Besides, download that PassLeader JN0-360 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnN5YmVFZ194RmwtOUJlWkVoSmV3RzNUcUhpYjlmU1U3NEVyYUxHQWdjMms (FREE VERSION!!!)
You want to influence how traffic enters your network. Using industry best practices, which two BGP attributes would you modify to accomplish this goal? (Choose two.)
A. AS Path
B. Local Preference
C. Next Hop
You have recently installed a second Routing Engine (RE) in your router. Which two statements correctly describe the expected behavior if the primary RE fails? (Choose two.)
A. The backup RE will assume the master role once the packet forwarding engine restarts.
B. The backup RE will immediately assume the master role.
C. The new master RE restarts the routing protocol process (rpd) and establishes any required adjacencies based on the configuration.
D. The new master RE maintains the existing protocol adjacencies initially established by the previous master RE.
Which command would you use to verify the presence of VPN routes on a PE device?
A. show route table bgp.l3vpn.0
B. show route protocol bgp terse | count
C. show route table inet.0
D. show route route-type vpn
A. Interface loO must be configured in the IS-IS hierarchy
B. Each network interface needs a unique family ISO address
C. The IS-IS level for an each interface must be specified
D. The ISO address for interface loO is not in hex format
Which statement is true of a Layer 2 circuit?
A. Layer 2 circuits use BGP for signaling
B. Layer 2 circuits use OSPF for signaling
C. Layer 2 circuits use LDP for signaling
D. Layer 2 circuits rely on RSVP for signaling
What are three circumstances under which a router sends link-state PDUs (LSPs)? (Choose three.)
A. LSPs are sent periodically every 9 seconds
B. LSPs are sent when there is a network change
C. LSPs are sent during adjacency formation
D. LSPs are sent in response to CSNP messages
E. LSPs are sent in response to PSNP messages
In an RSTP network, which combination of port types can exist on the root bridge?
A. There can be some combination of designated ports and backup ports
B. There can be some combination of root ports and alternate ports
C. All ports will be designated ports
D. All ports will be root ports
Your company has purchased two new Juniper Networks MX480 routers. Your manager has asked you to add these two devices to the existing ISIS network. Which two rules about ISIS adjacencies must you consider when carrying out the configuration? (Choose two.)
A. For Level 1 adjacencies, area IDs must be the same
B. For Level 2 adjacencies area IDs must be the same
C. The IS-IS levels configured on the interfaces must be the same
D. The IS-IS levels on the interfaces can be different
In the evaluation of an RSTP configuration BPDU. Which two values are contained in the Bridge ID value? (Choose two.)
A. root bridge address
C. originating bridge address
D. port number
Under which Junos configuration hierarchy is a load-balancing policy applied?
A. [edit routing-options family inet]
B. [edit forwarding-options family inet]
C. [edit routing-options forwarding-table]
D. [edit forwarding-options forwarding-table]
Which two configuration elements are defined under an MSTP instance? (Choose two.)
Given the network topology shown in the exhibit, you are configuring a GRE tunnel from Router A to Router C. Which interface configuration on Router A will successfully allow the tunnel to pass IPv4 traffic to Router C?
A. Option A
B. Option B
C. Option C
D. Option D
Which protocol is used by wired Ethernet to manage frame collisions?
A. IEEE 802.3 active monitoring
B. IEEE 802.5 active monitoring
C. carrier-sense multiple access with collision avoidance
D. carrier-sense multiple access with collision detection
You have been asked to provision a service provider’s network to accommodate Layer 3 VPNs as defined in RPC 4364. Which three tasks must be performed before the provider core is ready to carry VPN traffic? (Choose three.)
A. All P routers and PE routers must be configured to support MPLS administrative-groups (colors)
B. All PE routers must be configured to support Multiprotocol BGP (MP-BGP)
C. All P routers and PE routers must have a signaling protocol such as RSVP or LDP enabled
D. All P routers and PE routers must have a discovery protocol such as LLDP or CDP enabled
E. All P routers and PE routers must have MPLS reach ability to PE routers
You would like two LDP routers on opposite sides of your network to become neighbors. Which LDP message is used to form this relationship?
A. basic discovery
B. extended discovery
C. peer discovery
D. remote discovery
In which two environments would BGP add value? (Choose two.)
A. an enterprise environment with a single upstream connection
B. an enterprise environment with multiple upstream connections
C. a service provider environment
D. a home office environment
Referring to the exhibit, which policy(s) will be applied to neighbor 172.18.4.5?
A. Import policy-a and policy-d. export policy-b and policy-c
B. Import policy-d, export policy-b and policy-c
C. Import policy-d. export policy-c
D. Import policy-d only
In the exhibit Router A and Router B are operating on the LAN with Router B acting as the designated intermediate system (DIS).
When Router C and Router D are added to the LAN. Which statement is true?
A. Router C becomes the new DIS with no backup DIS.
B. Router D becomes the new DIS with no backup DIS.
C. Router C becomes the new DIS with Router B as the backup DIS.
D. Router D becomes the new DIS with Router A as the backup DIS.
You are logged into a router and issue the command show route protocol bgp. You see that you have received the route 10 0.4/24 from two different peers Both peers were learned using IBGP and Local-Preference. MED, Origin, and AS-path are equal. Which criterion is used for this situation?
A. cluster length
B. router ID (RID)
C. peer ID
D. IGP cost
How many equal-cost paths can be assigned to a single route in the Junos OS?
You want to configure support for an IPv6 environment In which hierarchy would you configure an OSPF area?
A. [edit protocols ospf-v6]
B. [edit protocols ipv6-ospf]
C. [edit protocols ipv6]
D. [edit protocols ospf3]
Which action does the local router take after sending a Notification message to a remote peer?
A. It begins to send route update information
B. It tears down the TCP session and attempts to re-establish it
C. It waits for the remote router to acknowledge that it is ready to receive routes
D. It changes its local state to Established
You have been asked to configure and assign addresses for your IPv6 routers in your network using dynamic assignment of DNS servers. You do not want the MAC address included as part of the IPv6 address. Which method of address assignment would accomplish these requirements?
B. stateless auto configuration
D. stateful auto configuration
Which three functions are performed by an OSPF area border router (ABR)? (Choose three.)
A. flooding Summary LSAs to connected areas
B. flooding ASBR Summary LSAs to connected areas
C. generating all Router LSAs for connected neighbors
D. performing summarization on routes headed to Area 0
E. flooding NSSA External LSAs to Area 0
A customer configures a bridge domain using a VLAN ID of 222. Which configuration will allow for the switch to potentially look at the IP header of incoming frames tagged with a VLAN ID of 222?
A. Option A
B. Option B
C. Option C
D. Option D
Your area border router (ABR) receives type 1.2 and 5 link-state advertisements (LSAs) from a non-backbone area. What would the ABR do with the information learned from the non-backbone area?
A. The ABR will generate type 2 and 3 LSAs and flood type 5 LSAs to the backbone area
B. The ABR will generate only type 3 LSAs and flood only type 5 LSAs to the backbone area
C. The ABR will generate type 3 and 4 LSAs. And flood type 5 LSAs to the backbone area
D. The ABR will generate only type 4 LSAs and flood only type 5 LSAs to the backbone area
Which label operation is performed by an MPLS ingress router?
An RSVP LSP in your network is operational but you are receiving complaints about network throughput across the LSP. You suspect that the RSVP bandwidth was omitted from the router configuration. Which operational mode command will help you verify your suspicions?
A. show interfaces terse
B. show mpls lsp extensive
C. show rsvp neighbor detail
D. show rsvp bandwidth
After configuring OSPF between two routers you check for an adjacency. You see that the adjacencies are not coming up on an Ethernet segment. What are two reasons that would cause this situation? (Choose two.)
A. You have a mismatched IP subnet/mask
B. Your hello timer intervals are mismatched
C. You are not using the same Junos version on each side
D. You priority values are mismatched
Thanks for reading the newest JN0-360 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-360 dumps in VCE and PDF here: https://www.passleader.com/jn0-360.html (372 Q&As Dumps)
Also, you can download that PassLeader JN0-360 braindumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnN5YmVFZ194RmwtOUJlWkVoSmV3RzNUcUhpYjlmU1U3NEVyYUxHQWdjMms (FREE VERSION!!!)