The newest Juniper JN0-212 dumps are available from PassLeader, you can get both JN0-212 VCE dumps and JN0-212 PDF dumps from PassLeader! PassLeader have added the newest JN0-212 exam questions into its JN0-212 VCE and PDF dumps now, the new JN0-212 braindumps will help you 100% passing the JNCIA-Cloud JN0-212 exam. Welcome to download the valid PassLeader JN0-212 dumps VCE and PDF here: https://www.passleader.com/jn0-212.html (140 Q&As Dumps)
Besides, download that PassLeader JN0-212 braindumps from Google Drive: https://drive.google.com/drive/folders/155m6KvFGMxKZHnGgvdfj9Lkdcv2UFvbt (~More JN0-212 Exam Questions in PDF file~)
NEW QUESTION 101
Which two statements are true about an SDN controller? (Choose two.)
A. An SDN controller automates repetitive tasks in a network.
B. An SDN controller regulates traffic transmission rates in a network.
C. An SDN controller centralizes control and configuration of a network.
D. An SDN controller stores and manages software mages.
NEW QUESTION 102
You are required to set up zero-day malware dedication for your private cloud without sending files off site for analysis. What will accomplish this task?
D. Sky ATP
NEW QUESTION 103
What are two examples of public cloud providers? (Choose two.)
C. Microsoft Azure
D. Amazon Web Services
NEW QUESTION 104
Which Juniper product provides insight into the underlay and overlay network at the same time?
A. Security Director
C. Edge Services Director
D. Juniper Extension Toolkit
E. Contrail Analysitcs
NEW QUESTION 105
Which two platforms share the same automation scripts? (Choose two.)
A. vMX Series
B. MX Series
C. Junos Space
NEW QUESTION 106
Which two statements are correct when using the native sensors model for the Juniper Telemetry Interface with AppFormix? (Choose two.)
A. Telemetry data is exported from the data plane.
B. Additional software must be installed on the Juniper device.
C. No additional software must be installed on the Juniper device.
D. Telemetry data is exported from the control plane.
NEW QUESTION 107
Which statement is true regarding Layer 3 underlay fabric networks?
A. Layer 3 underlay fabric networks can only be used across public networks.
B. Layer 3 underlay fabric networks rely on IPsec tunnels to interconnect tenants.
C. Layer 3 underlay fabric networks rely on Layer 2 loop prevention protocols.
D. Layer 3 underlay fabric networks are more scalable than Layer 2 fabric underlay networks.
NEW QUESTION 108
Which two statement describe virtual network functions (VNFs)? (Choose two.)
A. VNFs are provided at a customer’s site or telco cloud.
B. VNFs represent the service that monitors and tracks whether the services are performing according to design.
C. VNFs represent the infrastructure the comprises the telco underlay network.
D. VNFs can be deployed as a software function within a single x86 platform.
NEW QUESTION 109
What are two different modes available for the vMX on KVM that are based on CPU and memory availability? (Choose two.)
NEW QUESTION 110
Which open source management framework does VMware NSX use to manage VXLANs on Junos device?
B. Contrail Networking
NEW QUESTION 111
You want to prevent a single point of failure in your underlay network. Which two protocols would be used to accomplish this task? (Choose two.)
NEW QUESTION 112
Which statement is true about the vSRX Series and VMware NSX integration?
A. The NSX Distributed Firewall provides a container based layer of protection.
B. VMware NSX provides advanced Layer 4 through Layer 7 security services.
C. You can add the vSRX virtual firewall as security element in the VMware NSX environment.
D. The NSX Distributed Firewall users application identification.
NEW QUESTION 113
Which Junos Space application integrates with the Sky ATP application?
A. Virtual Director
B. Connectivity Services Director
C. Security Director
D. Network Director
NEW QUESTION 114
What is a primary function of an underlay network?
A. to advertise Internet routes into an overlay network
B. to advertise loopback interfaces to establish an overlay network
C. to advertise server interfaces to establish an overlay network
D. to advertise client host routes into an overlay network
NEW QUESTION 115
The NorthStar Controller has identified a shared risk in the network. Which statement is true in this scenario?
A. Multiple LSPs cross the same path.
B. A customer’s VNF is at risk of failing.
C. The NorthStar Controller is detecting database errors.
D. A PE device hosts multiple edge customers.
NEW QUESTION 116
What are two benefits of NFV? (Choose two.)
A. NFV provides methodologies to interconnect data centers.
B. NFV provides control over the deployment of all virtual machines.
C. NFV allows for the automated control of service chains.
D. NFV makes the management of virtualized network functions dynamic.
NEW QUESTION 117
Which two statements are true regarding the NorthStar Controller API? (Choose two.)
A. The southbound interface connects to routers and switches using IS-IS, OSPFv2, BGP-LS, and PCEP protocols.
B. The southbound interface is a RESTful implementation that can be programmed with a programming language.
C. The northbound interface connects to routers and switches using IS-IS, OSPFv2, BGP-LS, and PCEP protocols.
D. The northbound interface is a RESTful implementation that can be programmed with a programming language.
NEW QUESTION 118
What are two roles of the NorthStar? (Choose two.)
A. to push endpoint device images to customer edge devices
B. to distribute routing updates to network devices
C. to optimize paths through the network based on traffic statistics
D. to calculate paths through the network based on topology information
NEW QUESTION 119
Which protocol does Juniper Networks recommend to provide real-time updates of the network topology to the NorthStar Controller?
NEW QUESTION 120
What are two characteristics of Juniper’s Connected Security Solution? (Choose two.)
A. manual secure policy control
B. dynamic VPN connections
C. centralized management
D. enforcement everywhere on the network
NEW QUESTION 121
Devices in your data center have become unwilling participants of botnet attacks. In this scenario, which security technology should you use to stop this behavior?
A. Policy Enhancer.
B. Sky ATP GeoIP threat protection.
C. Sky ATP C&C threat protection.
NEW QUESTION 122
Which two protocols would be used by the NorthStar controller to provision tunnels on an edge router? (Choose two.)
NEW QUESTION 123
Which OpenStack service manage image storage?
NEW QUESTION 124
You are deploying a layer 3 underlay network with 10,000 devices and hosts. Which two statements are correct in this scenario? (Choose two.)
A. Loop prevention is provided by the routing protocol.
B. Routing table can become very large.
C. RSTP can be used for loop prevention.
D. The MAC tables can become very large.
NEW QUESTION 125
Which two data models are supported for the Junos Telemetry Interface (JTI)? (Choose two.)
A. Azure Application Insights
B. Native Sensors
C. Amazon Kinesis
NEW QUESTION 126
You need to find a product that will allow for the deployment of security devices to a new tenant edge network in less than one second. Which product accomplishes this task?
NEW QUESTION 127
Which statement is true about VNFs?
A. VNFs are always physical devices.
B. VNFs are virtual devices.
C. VNFs are only used in service provider clouds.
D. VNFs are only used in data centers.
NEW QUESTION 128
What is a primary difference between NFV and VNF?
A. A VNF defines the network underlay tunnel methodology while NFV is firewall that inspects traffic in the overlay network.
B. NFV is the framework that describes how a virtual function should operate while VNF is the virtual function itself.
C. A VNF operates on a bare metal server while NFV operates on a switch.
D. NFV identifies the host on which the VNF operates.
NEW QUESTION 129
Which type of API does contrail service orchestration provide when connecting with OSS and BSS applications?
NEW QUESTION 130
Which message type is supported by the Junos Telemetry interface?
NEW QUESTION 131
Which Junos Space application integrates with both VMware vSphere and VMware NSX solutions to automate the movement of VLANs between physical and virtual servers?
A. Edge Services Director
B. Policy Enforcer
C. Network Director
D. Connectivity Services Director
NEW QUESTION 132
What are two characteristics of cloud computing? (Choose two.)
A. customer-owned equipment
B. measured service
C. resource pooling
D. unrestricted public access to all resources
NEW QUESTION 133
What are two goals of cloud security automation? (Choose two.)
A. to centrally manage security policies
B. to transition all security functions to cloud platforms
C. to automate responses to detected security threats
D. to implement all security functions in hardware
NEW QUESTION 134
Which two statements describe cloud CPE? (Choose two.)
A. Cloud CPE require heavy investment in vendor-specific hardware.
B. Cloud CPE encourages administrators to use all-in-one appliances.
C. Cloud CPE allows multivendor, open support of software-based functions.
D. Cloud CPE eliminates the need for investing in expensive hardware.
NEW QUESTION 135
What are two protocols used by NorthStar Controller to discover the network topology? (Choose two.)
NEW QUESTION 136
AppFormix has been deployed in your data center using the Juniper Telemetry Interface(JTI) native sensors. However, the underlay devices have not yet been set up to work with the JTI native sensors. Which action is required for the JTI native sensors to work properly?
A. Install the AppFormix network agent on the underlay devices.
B. Enable NETCONF over SSH on the underlay devices.
C. Enable SSH on the underlay devices.
D. Enable GPB messaging on the underlay devices.
NEW QUESTION 137
Thanks for reading the newest JN0-212 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-212 dumps in VCE and PDF here: https://www.passleader.com/jn0-212.html (140 Q&As Dumps)
Also, you can download that PassLeader JN0-212 braindumps from Google Drive: https://drive.google.com/drive/folders/155m6KvFGMxKZHnGgvdfj9Lkdcv2UFvbt (~More JN0-212 Exam Questions in PDF file~)