[16-Nov-2020] New PassLeader JN0-103 JNCIA-Junos Dumps with VCE and PDF (New Questions)

The newest Juniper JN0-103 dumps are available from PassLeader, you can get both JN0-103 VCE dumps and JN0-103 PDF dumps from PassLeader! PassLeader have added the newest JN0-103 exam questions into its JN0-103 VCE and PDF dumps now, the new JN0-103 braindumps will help you 100% passing the JNCIA-Junos JN0-103 exam. Welcome to download the valid PassLeader JN0-103 dumps VCE and PDF here: https://www.passleader.com/jn0-103.html (100 Q&As Dumps –> 123 Q&As Dumps –> 151 Q&As Dumps)

Besides, download that PassLeader JN0-103 braindumps from Google Drive: https://drive.google.com/open?id=1ND7EbSI4ULA13SMXCqfTQ_jl7bjW1QVT (~More JN0-103 Exam Questions in PDF file~)

NEW QUESTION 81
Which two statements describe IPv4 default behavior for BGP? (Choose two.)

A.    All Active BGP routes are exported to configured EBGP neighbors.
B.    All BGP routes are exported to configured EBGP neighbors.
C.    All BGP routes are imported into the inet.0 routing table.
D.    All BGP routes are imported into the inet4.0 routing table.

Answer: AC

NEW QUESTION 82
Which two statements describe the connection between control plane and forwarding plane? (Choose two.)

A.    No rate limiter is configured by default.
B.    A rate limiter is configured by default.
C.    Exception traffic is preferred over the control traffic during congestion.
D.    Control traffic is preferred over the exception traffic during congestion.

Answer: BD

NEW QUESTION 83
You must configure the 2bfc:0000:0000:beef:0217:cbff:0000:5c85 IPv6 address on your device. In this scenario, which three addresses are correct? (Choose three.)

A.    2bfc::beef:217:cbff:0:5c85
B.    2bfc:0:0:beef:0217:cbff:0:5c85
C.    2BFC::BEEF:0217CBFF:0:5C85
D.    2bfc:0:beef:0217:cbff:0:5c85
E.    2BFC::BEEF:217:CBFF::5C85

Answer: ABC

NEW QUESTION 84
Which process is responsible for controlling all interfaces on a Junos device?

A.    rpd
B.    chassisd
C.    dcd
D.    mgd

Answer: C

NEW QUESTION 85
You have configuration groups applied on your router. Which command would you use to see all components of the interface hierarchy?

A.    show configuration interfaces | display inheritance
B.    show configuration interfaces | display changed
C.    show configuration interfaces | display set
D.    show configuration interfaces | display detail

Answer: A

NEW QUESTION 86
You successfully established a BGP session with peer, but do not see any routes learned from the peer, What would cause this problem?

A.    A routing policy is blocking BGP from learning the routes.
B.    Unicast reverse-path-forwarding is blocking BGP from learning the routes.
C.    A security policy is blocking BGP from learning the routes.
D.    The firewall filter is blocking the BGP from learning the routes.

Answer: A

NEW QUESTION 87
Which two conditions must exist in a Junos device for traffic to transit the device to a specific destination? (Choose two.)

A.    A forwarding table entry for that destination must exist.
B.    A routing policy must be in place on the device.
C.    A firewall filter must exist to allow traffic to reach that destination.
D.    A routing table entry for that destination must exit.

Answer: AC

NEW QUESTION 88
What configuration parameter on a Junos device modifies the default next-hop resolution behavior of a static route?

A.    Resolve
B.    No-readvertise
C.    Passive
D.    Preference

Answer: A

NEW QUESTION 89
In which directory the traceoption files stored by default?

A.    /var/db/
B.    /var/tmp/
C.    /var/log/
D.    /var/home/

Answer: C

NEW QUESTION 90
What is the minimum system-defined user class required to issue clear commands?

A.    read-only
B.    super-user
C.    operator
D.    authorized

Answer: C

NEW QUESTION 91
What is the name of the volume containing the software and files used for the day-to-day operation of a device using Junos with upgraded FreeBSD?

A.    /oam
B.    /active
C.    /var
D.    /junos

Answer: D

NEW QUESTION 92
Which source of routing information is preferred by default?

A.    BGP
B.    RIP
C.    direct
D.    static

Answer: C

NEW QUESTION 93
Which two commands would you use to reset the candidate configuration to the active configuration? (Choose two.)

A.    rollback 0
B.    rollback 1
C.    rollback 2
D.    rollback

Answer: AD

NEW QUESTION 94
Which two keystrokes will auto-complete a command? (Choose two.)

A.    Esc
B.    Tab
C.    Spacebar
D.    End

Answer: BC

NEW QUESTION 95
Which keystroke is used to auto-complete user-defined variables?

A.    Spacebar
B.    Home
C.    Esc
D.    Tab

Answer: D

NEW QUESTION 96
Routing policies contain which two type of statements? (Choose two.)

A.    and
B.    from
C.    default
D.    then

Answer: BD

NEW QUESTION 97
Which command allows you to verify the syntax and consistency of your configuration without actually activating your configuration?

A.    user interfaces
B.    commit verify
C.    commit check
D.    check commit
E.    commit no-activate

Answer: C

NEW QUESTION 98
In your configuration, an interface contains multiple IP addresses belonging to the same subnet. You want to identify the IP address to use for packets sent to hosts on the same subnet. Which parameter would you use to accomplish this task?

A.    relative
B.    preferred
C.    primary
D.    patch

Answer: B

NEW QUESTION 99
……


Thanks for reading the newest JN0-103 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-103 dumps in VCE and PDF here: https://www.passleader.com/jn0-103.html (100 Q&As Dumps –> 123 Q&As Dumps –> 151 Q&As Dumps)

Also, you can download that PassLeader JN0-103 braindumps from Google Drive: https://drive.google.com/open?id=1ND7EbSI4ULA13SMXCqfTQ_jl7bjW1QVT (~More JN0-103 Exam Questions in PDF file~)