The newest Juniper JN0-648 dumps are available from PassLeader, you can get both JN0-648 VCE dumps and JN0-648 PDF dumps from PassLeader! PassLeader have added the newest JN0-648 exam questions into its JN0-648 VCE and PDF dumps now, the new JN0-648 braindumps will help you 100% passing the JNCIP-ENT JN0-648 exam. Welcome to download the valid PassLeader JN0-648 dumps VCE and PDF here: https://www.passleader.com/jn0-648.html (95 Q&As Dumps –> 120 Q&As Dumps)
Besides, download that PassLeader JN0-648 braindumps from Google Drive: https://drive.google.com/open?id=1WgttZ1C6y6hC2jklqIw4EWJ7Odb2bKJR (FREE VERSION!!!)
NEW QUESTION 81
Your campus EX9200 core devices are highly oversubscribed on bandwidth ans reporting massive dropped packets. To immediately address the issue, you decide to implement shaping on all interfaces. Which action will accomplish?
A. Apply the input-shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.
B. Define a CoS input traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
C. Define a CoS output traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
D. Apply the shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.
NEW QUESTION 82
What allows non-Web enabled devices to access the network on a port configured for captive portal?
A. A MAC address white list can be configured on the switch to allow specific MAC addresses to bypass the captive portal process.
B. LLDP can be used to query the type of device that is attempting to access the network, and predefined device types can be allowed to bypass the captive portal process.
C. Captive portal can be configured to only prompt for credentials when HTTP or HTTPS traffic is requested on a port to allow on-HTTP enabled devices access to the network.
D. Authentication credentials for specific devices can be preconfigured on the switch for automatic authentication.
NEW QUESTION 83
Which two statements are true about PIM source-specific multicast (SSM)? (Choose two.)
A. The receiver DR builds a source-base tree to the RP.
B. S, G is always used.
C. A Different group address must be used by each source.
D. IGMPv3 is required.
NEW QUESTION 84
Which two statements about MVRP are correct? (Choose two.)
A. MVRP monitors interfaces using VSTP and dynamically creates VLANs as necessary.
B. MVRP PDUs are sent to other switches as periodic intervals.
C. MVRP can propagate dynamic VLANs created on one switch to another switch.
D. MVRP is enabled by adding trunk ports under the [edit protocols mvrp] hierarchy.
NEW QUESTION 85
Which three databases are used by the Dijkstra algorithm? (Choose three.)
A. Tree Database
B. Link State Database
C. Candidate Database
D. MAC Database
E. Configuration Database
NEW QUESTION 86
A customer needs to pass Layer 2 protocols between sites. Which protocol or standard would be required to implement connectivity on EX4300, EX3400, and EX2300 devices?
NEW QUESTION 87
Which statement is correct about MSTP?
A. MSTP enables mapping multiple independent spanning-tree instances onto one physical topology.
B. MSTP enables dynamic discovery of Layer 2 neighbors.
C. MSTP dynamically manages VLAN registration in a LAN.
D. MSTP uses stacked VLAN tags to extend a Layer 2 Ethernet connection between multiple sites.
NEW QUESTION 88
You configured static mode power management on an EX4300 to provide PoE power to telephone and access point equipment. Which statement is correct regarding the PoE power budget?
A. Power is budgeted to devices on a first come, first served basis as devices are connected.
B. The power budgeted will be based on the device class connected to each port.
C. Power is budgeted to a port even if no device is connected to the port.
D. The power budgeted to ports will adjust to how much power a device actually uses.
NEW QUESTION 89
What information must you gather from the satellite device to provision a Junos Fusion Enterprise deployment on the aggregation device? (Choose two.)
A. MAC address.
B. Serial number.
C. Software version.
D. Model number.
NEW QUESTION 90
You are asked to merge a RIP network with your OSPF network. As a first step, you establish connectivity between the RIP network and the OSPF network. The RIP network connects to an NSSA area. Which two statements are true in this scenario? (Choose two.)
A. To share RIP routes with the OSPF network, an export policy will be required on the ABR.
B. To share RIP routes with the OSPF network, an export policy will be required on the ASBR.
C. By default, external OSPF routes have a higher route preference than RIP routes.
D. Be default, RIP routes have a higher route preference than external OSPF routes.
NEW QUESTION 91
You created a firewall rule to protect the Routing Engine. After applying the rule, your OSPF adjacencies dropped. How would you solve this problem?
A. Create a firewall term that allows IP protocol 89.
B. Define a router ID under the [edit routing-options] hierarchy.
C. Configure the loopback interface under the [edit protocols ospf] hierarchy.
D. Apply the firewall filter to the physical ports.
NEW QUESTION 92
You want to implement an RP in your PIM sparse mode environment, you are considering the advantages and disadvantages of the various RP election methods. In this scenario, which three implementation guidelines are correct? (Choose three.)
A. The auto-RP method requires using two PIM dense mode groups from the 323/8 range.
B. The auto-RP method includes the ability to maintain a backup RP.
C. With the bootstrap method, the primary criterion for electing a BSR is priority value.
D. When multiple election methods are implemented on a device, the static method is preferred.
E. The static method requires configuration on all devices in the PIM domain.
NEW QUESTION 93
What are two OSPF LSA types? (Choose two.)
NEW QUESTION 94
Which statement is correct about CoS policers on Junos devices?
A. Traffic that exceeds a policer’s traffic profile can be dropped or assigned to a specific drop profile.
B. A policer can assign in-profile traffic to a specific forwarding class.
C. A policer does not alter in-profile traffic.
D. Policers can be configured to buffer traffic that exceeds the policer’s traffic profile.
NEW QUESTION 95
Thanks for reading the newest JN0-648 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-648 dumps in VCE and PDF here: https://www.passleader.com/jn0-648.html (95 Q&As Dumps –> 120 Q&As Dumps)
Also, you can download that PassLeader JN0-648 braindumps from Google Drive: https://drive.google.com/open?id=1WgttZ1C6y6hC2jklqIw4EWJ7Odb2bKJR (FREE VERSION!!!)