[23-Jan-2022] New PassLeader JN0-1362 JNCDS-SP Dumps with VCE and PDF (New Questions)

The newest Juniper JN0-1362 dumps are available from PassLeader, you can get both JN0-1362 VCE dumps and JN0-1362 PDF dumps from PassLeader! PassLeader have added the newest JN0-1362 exam questions into its JN0-1362 VCE and PDF dumps now, the new JN0-1362 braindumps will help you 100% passing the JNCDS-SP JN0-1362 exam. Welcome to download the valid PassLeader JN0-1362 dumps VCE and PDF here: https://www.passleader.com/jn0-1362.html (75 Q&As Dumps)

Besides, download that PassLeader JN0-1362 braindumps from Google Drive: https://drive.google.com/drive/folders/1YCsHjJS_Cg_g3MaD9yIghrD4o5RuJ-u6 (~More JN0-1362 Exam Questions in PDF file~)

NEW QUESTION 1
A new customer asks that you extend their LAN across your WAN. The customer wants to retain administrative control over all routing in their network. Which two architectures would meet this requirement? (Choose two.)

A.    Public Internet
B.    Layer 2 VPN
C.    Layer 3 VPN
D.    VPLS

Answer: BD

NEW QUESTION 2
Which three statements are true about class-of-service (CoS) schedulers? (Choose three.)

A.    Schedulers determine into which queue a packet should be assigned.
B.    Schedulers determine the packet transmission rate for each queue.
C.    Schedulers determine the packet markings that are used to prioritize traffic.
D.    Schedulers determine how packets are handled during times of congestion.
E.    Schedulers determine the size of buffer assigned to each queue.

Answer: ABD

NEW QUESTION 3
You are asked to provide a design proposal for a service provider network that will need to support both IPv4 and IPv6 traffic across your IPv4 core. You do not want to change the core design. In this scenario, what are two solutions that you would implement at the peering edge? (Choose two.)

A.    6PE.
B.    NAT64.
C.    GRE tunneling.
D.    Native IPv6 routing.

Answer: AD

NEW QUESTION 4
You are responding to an RFP that proposes using MX Series devices for subscriber management services. In this scenario, which two protocols should you consider for the AAA components? (Choose two.)

A.    RADIUS
B.    PPPoE
C.    DHCP
D.    Diameter

Answer: AC

NEW QUESTION 5
What are two risks when using a source-based RTBH solution? (Choose two.)

A.    The attacker address could be a CGNAT address resulting in a larger service outage for users.
B.    The target of the attack may not support RTBH.
C.    The attacker’s address could be unknown.
D.    The target of an attack would be blocked resulting in a target being offline.

Answer: AB

NEW QUESTION 6
Your customer is deploying a multitenant data center and needs help with the WAN edge design. What are two main design considerations for this environment? (Choose two.)

A.    control plane redundancy
B.    NAT requirements
C.    unified threat management
D.    Virtual Chassis Control Protocol

Answer: BC

NEW QUESTION 7
You are designing a full mesh of connections between multiple enterprise. In this scenario, which two statements are correct? (Choose two.)

A.    Security and Internet control is applied at a central location.
B.    All sites can communicate directly with each other.
C.    It is easier for administrators to enforce application-aware services with a single point of management.
D.    IPsec tunnels can be used to secure traffic between sites.

Answer: AB

NEW QUESTION 8
According to Juniper Networks, which two statements describe OOB network design best practices? (Choose two.)

A.    Ensure that all users are authenticated using individual accounts and credentials.
B.    Ensure that the management network is accessible through the production network.
C.    Ensure that the management network uses a unique IP network.
D.    Ensure that only console ports are used to manage devices.

Answer: CD

NEW QUESTION 9
You are designing a new deployment of Paragon Pathfinder (formerly known as NorthStar). You are asked to ensure that LSPs can be created only from Paragon Pathfinder itself. What will accomplish this task?

A.    PCC initiated.
B.    PCC delegated.
C.    PCE delegated.
D.    PCE initiated.

Answer: C

NEW QUESTION 10
You are responding to an ERFP for a customer’s MX-based BNG deployment that must accommodate at least 8000 subscribers. However, the customer’s aggregation device only supports 4094 VLANs. Which action would you propose to solve the customer’s capacity concern?

A.    Use VLAN translation.
B.    Use stacked VLANs.
C.    Add an additional fabric module.
D.    Add an additional line card.

Answer: D

NEW QUESTION 11
What are two considerations for using the public Internet for WAN connectivity? (Choose two.)

A.    End-to-end traffic is best effort.
B.    It is inherently insecure, and additional encryption should be considered.
C.    End-to-end CoS and larger MTU are possible.
D.    It is inherently secure and does not require additional encryption.

Answer: BC

NEW QUESTION 12
You are designing a Metro Ethernet ring topology that requires a sub 50ms failover. Which two protocols will meet this requirement? (Choose two.)

A.    Spanning Tree Protocol.
B.    Link Aggregation Control Protocol.
C.    MPLS fast reroute.
D.    Ethernet ring protection switching.

Answer: AD

NEW QUESTION 13
Which two network availability features require a router to have two Routing Engines installed? (Choose two.)

A.    JVRRP
B.    GRES
C.    nonstop routing
D.    graceful restart

Answer: AC

NEW QUESTION 14
Which two statements are correct about Junos Space Connectivity Services Director? (Choose two.)

A.    It is used to design, provision, and monitor Label Discovery Protocol (LDP) and Border Gateway Protocol (BGP) services on devices.
B.    It is used to design and simulate MPLS-TE and LSP routing.
C.    It is used to design, provision, and deploy MPLS-dynamic, RSVP-signaled LSP, and static LSP services on devices.
D.    It is used to provide zero touch provisioning (ZTP), which simplifies the deployment of networks by providing policy-driven plug-and-play provisioning and network bring-up operations.

Answer: CD

NEW QUESTION 15
What are two network management benefits of using devices in your design proposals? (Choose two.)

A.    Virtualization allows network administrators to dynamically make configuration changes to all network devices.
B.    Virtualization can lower costs because there are fewer physical devices that need to be purchased and managed.
C.    Virtualization can increase the available network bandwidth because their interface speeds are only limited by the host device.
D.    Virtualization allows network administrators to dynamically add and remove services being provided.

Answer: BD

NEW QUESTION 16
Which statement describes Juniper Networks network management design best practices?

A.    You should ensure that automaton is used sparingly.
B.    You should ensure that only off-box automation scripts are used.
C.    You should ensure that only on-box automaton scrips are used.
D.    You should ensure that automation is used as much as possible.

Answer: B

NEW QUESTION 17
You are responding to an RFP for a services provider that wants to upgrade their MPLS/LDP network to use traffic engineering. Which two statements are correct in this scenario? (Choose two.)

A.    Segment routing requires a controller for bandwidth reservations.
B.    Segment routing uses LDP for label adjacency making it backward-compatible with LDP.
C.    RSVP-TE requires a controller for bandwidth reservations.
D.    RSVP-TE creates session states on core routers.

Answer: AD

NEW QUESTION 18
What are three limitations of using the Internet as the primary WAN service for enterprise organizations? (Choose three.)

A.    generally higher cost
B.    no latency considerations
C.    lack of connectivity
D.    no quality of service guarantees
E.    no inherent security

Answer: ABC

NEW QUESTION 19
You are designing a new service provider network and need to select a label distribution mechanism that guides certain types of traffic along specific paths within the network. Which two label distribution mechanisms would satisfy the requirements? (Choose two.)

A.    RSVP
B.    segment routing
C.    LDP
D.    BGP-LU

Answer: AC

NEW QUESTION 20
What are two ways to provider redundancy in a WAN design to address physical failures? (Choose two.)

A.    Select products that use MC-LAG.
B.    Select products with different types of MICs.
C.    Select products that use multiple Routing Engines.
D.    Select products with different versions of firmware.

Answer: BD

NEW QUESTION 21
What are two high availability solutions for routers with a single Routing Engine? (Choose two.)

A.    VRRP.
B.    Non-stop active routing.
C.    Graceful restart.
D.    GRES.

Answer: AD
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/high-availability/topics/concept/high-availability-features-in-junos-introducing.html

NEW QUESTION 22
……


Thanks for reading the newest JN0-1362 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-1362 dumps in VCE and PDF here: https://www.passleader.com/jn0-1362.html (75 Q&As Dumps)

Also, you can download that PassLeader JN0-1362 braindumps from Google Drive: https://drive.google.com/drive/folders/1YCsHjJS_Cg_g3MaD9yIghrD4o5RuJ-u6 (~More JN0-1362 Exam Questions in PDF file~)