The newest Juniper JN0-648 dumps are available from PassLeader, you can get both JN0-648 VCE dumps and JN0-648 PDF dumps from PassLeader! PassLeader have added the newest JN0-648 exam questions into its JN0-648 VCE and PDF dumps now, the new JN0-648 braindumps will help you 100% passing the JNCIP-ENT JN0-648 exam. Welcome to download the valid PassLeader JN0-648 dumps VCE and PDF here: https://www.passleader.com/jn0-648.html (65 Q&As Dumps –> 95 Q&As Dumps –> 120 Q&As Dumps)
Besides, download that PassLeader JN0-648 braindumps from Google Drive: https://drive.google.com/open?id=1WgttZ1C6y6hC2jklqIw4EWJ7Odb2bKJR (FREE VERSION!!!)
NEW QUESTION 1
You ate deploying P|M source-specific multicast (SSM) for a new multicast messaging service. You have configured the multicast source to use 236.44.123.100 as the multicast address. You are not able to join the PIM SSM multicast teed. Which two solutions would resolve this problem? (Choose two.)
A. Add the multicast address to the (edit routing-options multicast ssm-map) stanza.
B. Reconfigure the multicast source to use an address in the range of 224.0.0 0 through 224.255.255.255.
C. Reconfigure the multicast source to use an address in the range of 232 0.0 0 through 232.255.255.255.
D. Add the multicast address to the [edit routing-options multicast ssm-groups] stanza.
Answer: AC
NEW QUESTION 2
Your network has Junos Fusion configured with MX960 routers as aggregation devices (AD) and QFX5100 switches as satellite devices (SD). Which two statements are coned in this scenario? (Choose two.)
A. The AD runs the Junos software for all its connected SDs.
B. The Fusion extended ports are configured on the SDs.
C. SDs are added to the AD by configuring the cascade port on the AD.
D. All SDs connected to a single AD must use the same software version.
Answer: BC
NEW QUESTION 3
Which two statements are true regarding bidirectional PIM? (Choose two.)
A. It eliminates the need for an RP.
B. Devices only store group specific entries.
C. It uses multicast tunneling to forward traffic.
D. Forwarding paths can be suboptimal.
Answer: BD
NEW QUESTION 4
Which protocol is used for port-level access control and authentication?
A. MD5
B. IPsec
C. 802.1x
D. AES
Answer: C
NEW QUESTION 5
Which three types of ports are used for Junos Fusion Enterprise? (Choose three.)
A. extended port
B. authenticated port
C. cascade port
D. uplink port
E. designated port
Answer: ACD
NEW QUESTION 6
Which two statements about BGP communities are true? (Choose two.)
A. A prefix can only belong to one community.
B. A prefix can belong to more than community.
C. A community is not a transitive attribute.
D. A BGP device can set, append, or modify the community of a route.
Answer: AD
NEW QUESTION 7
What information is contained in an OSPF LSA header? (Choose two.)
A. protocol
B. options
C. length
D. subnet mask
Answer: BC
NEW QUESTION 8
What are three well-known mandatory BGP attributes? (Choose three.)
A. AS-path
B. community
C. origin
D. MED
E. next-hop
Answer: ACE
NEW QUESTION 9
A BA classifier, input policer, and a multifield classifier are applied to an interface, in which order are these features processed?
A. policer -> BA classifier -> multifield classifier
B. BA classifier -> multifield classifier -> policer
C. multifield classifier -> BA classifier -> policer
D. policer -> multifield classifier -> BA classifier
Answer: A
NEW QUESTION 10
You are redistributing static routes into an OSPF area. Which two statement are true is this scenario? (Choose two.)
A. The external route advertisements have a domain scope.
B. The area must be stub area.
C. The area must be the backbone area.
D. The routes can be advertised in type LSAs.
Answer: CD
NEW QUESTION 11
You want to view the VLANs that have been created dynamically using MVRP. Which operational mode command will display this information?
A. show mvrp dynamic-vlan memberships
B. show mvrp interface
C. show mvrp registration-state
D. show mvrp applicant-state
Answer: A
NEW QUESTION 12
Which type of BGP is used to peer with a different autonomous system?
A. external
B. classless
C. dynamic
D. static
Answer: A
NEW QUESTION 13
Which EVPN route type is used for fast convergence and for advertising the split horizon label?
A. Type 4
B. Type 2
C. Type 1
D. Type 5
Answer: C
NEW QUESTION 14
What are two supported PoE management modes? (Choose two.)
A. mixed
B. standalone
C. class
D. static
Answer: CD
NEW QUESTION 15
When redistributing IGP routes into BGP, what information is used by default on Junos platforms to determine the BGP route’s MED attribute value?
A. routing information base
B. the IGP route preference
C. the IGP Metric
D. route protocol source
Answer: C
NEW QUESTION 16
You are designing a multicast topology to support IPv4 IPTV broadcasts in your organization. The design should support multiple multicast senders with overlapping group addresses while preventing interference between them. Client devices currently do not support IGMPv3. Which approach would fulfill these requirements?
A. Implement PIM-SM and SSM with SSM maps to support IGMPv2 clients.
B. Implement bidirectional PIM.
C. Assign group addresses in the 224/4 range and implement PIM-DM.
D. Implement MLD.
Answer: C
NEW QUESTION 17
You are enabling MSTP in your Layer 2 network to prevent loops. In this scenario, which three parameters must match on all switches in the network? (Choose three.)
A. configuration name
B. bridge priority
C. MSTI-to-VLAN mapping
D. max age
E. revision level
Answer: ACE
NEW QUESTION 18
You are implementing 802.1x authentication in your Layer 2 network. Each user will have a computer and a phone and you must ensure that both device are authenticated individually. In this scenario, which supplicant mode should be used?
A. single-secure
B. single
C. captive-portal
D. multiple
Answer: B
NEW QUESTION 19
Which two statements are correct about a functional ESI LAG interface? (Choose two.)
A. The LACP system ID must be different.
B. The LACP system ID must be the same.
C. The ESI values must be the same.
D. The ESI values must be different.
Answer: BC
NEW QUESTION 20
You are implementing 802.1x access control in your network of EX Series switches. You have some older client devices connecting to your network which do not support 802.1x. Which statement is true regarding the older devices?
A. By default, the supplicant will send EAP messages and keep the port in an unauthorized state.
B. By default, the authenticator will send EAP messages and keep the port in an unauthorized state.
C. By default, the supplicant will send EAP messages until it reaches a predefined limit, after which it begins to forward traffic.
D. By default, the authenticator will send EAP messages until it reaches a predefined, after which it begins to forward traffic.
Answer: C
NEW QUESTION 21
……
Thanks for reading the newest JN0-648 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-648 dumps in VCE and PDF here: https://www.passleader.com/jn0-648.html (65 Q&As Dumps –> 95 Q&As Dumps –> 120 Q&As Dumps)
Also, you can download that PassLeader JN0-648 braindumps from Google Drive: https://drive.google.com/open?id=1WgttZ1C6y6hC2jklqIw4EWJ7Odb2bKJR (FREE VERSION!!!)
