[11-Jan-2021] New PassLeader JN0-362 JNCIS-SP Dumps with VCE and PDF (New Questions)

The newest Juniper JN0-362 dumps are available from PassLeader, you can get both JN0-362 VCE dumps and JN0-362 PDF dumps from PassLeader! PassLeader have added the newest JN0-362 exam questions into its JN0-362 VCE and PDF dumps now, the new JN0-362 braindumps will help you 100% passing the JNCIS-SP JN0-362 exam. Welcome to download the valid PassLeader JN0-362 dumps VCE and PDF here: https://www.passleader.com/jn0-362.html (199 Q&As Dumps)

Besides, download that PassLeader JN0-362 braindumps from Google Drive: https://drive.google.com/drive/folders/1wjEU2VsvxU7ITfkLl3Pf26FRYbLheGPy (~More JN0-362 Exam Questions in PDF file~)

NEW QUESTION 173
Which two fields of a hello packet must match on both routers when forming an OSPF adjacency? (Choose two.)

A.    Hello interval
B.    Designated route
C.    Router priority
D.    Network mask

Answer: AD

NEW QUESTION 174
You want to save adjacency formation time between two routers participating in OSPF, as well as reduce the size of the OSPF link-state database. How would you accomplish these tasks?

A.    Configure a virtual link.
B.    Specify a designated router.
C.    Specify a backup designated router.
D.    Define a point-to-point connection.

Answer: D

NEW QUESTION 175
What is the TTL value for EBGP?

A.    64
B.    48
C.    255
D.    1

Answer: D

NEW QUESTION 176
You have a stub OSPF area running in your network. Your supervisor has asked you to build a virtual link across this area to connect new equipment acquired in a recent ISP acquisition. Which statement is correct about this scenario?

A.    Type 5 LSAs would be blocked in a stub area.
B.    Type 5 LSAs would carry external information across your transit area to the backbone.
C.    Type 5 LSAs would be seen only in the newly attached area.
D.    Type 5 LSAs would be converted to type 7 LSAs.

Answer: A

NEW QUESTION 177
Which two events could cause the BGP Active state to appear? (Choose two.)

A.    The local router does not have a route to the peer device.
B.    The local router failed to establish a TCP connection with the peer device.
C.    A firewall is stopping all UDP packets.
D.    The BGP configuration is incomplete.

Answer: BD

NEW QUESTION 178
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites. Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

A.    path MTU discovery
B.    fragmentation discovery
C.    end-to-end MTU discovery
D.    packet throughput discovery

Answer: A

NEW QUESTION 179
Which three statements are true about the BGP community attribute? (Choose three.)

A.    There are three well-known communities.
B.    Communities can be used to signal local preference in other AS networks.
C.    Only well-known communities can be passed between AS networks.
D.    Routing policies can be simplified using BGP communities.
E.    Communities are used in the route selection process.

Answer: ABD

NEW QUESTION 180
What are two benefits of using an OSPF designated router (DR)? (Choose two.)

A.    Reduces the size of the link-state database.
B.    Reduces LSA flooding on a broadcast segment.
C.    Reduces LSA flooding throughout an OSPF area.
D.    Reduces router resources used.

Answer: BD

NEW QUESTION 181
Which forwarding table designation is used to indicate that load balancing is working correctly?

A.    ucst
B.    msct
C.    ulst
D.    mlst

Answer: C

NEW QUESTION 182
Which two statements correctly describe the BGP community attribute? (Choose two.)

A.    Only one community can be associated with a route.
B.    The community attribute is an optional nontransitive attribute.
C.    Multiple communities can be associated with a route.
D.    The community attributes is an optional transitive attribute.

Answer: CD

NEW QUESTION 183
To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?

A.    1476
B.    1492
C.    1500
D.    1524

Answer: D

NEW QUESTION 184
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)

A.    protocol
B.    source port
C.    destination port
D.    source address
E.    destination address

Answer: ADE

NEW QUESTION 185
What are three valid BGP message types? (Choose three.)

A.    Refresh
B.    Hello
C.    Route
D.    Keepalive
E.    Open

Answer: ADE

NEW QUESTION 186
Which two configuration elements must match on all switches participating in the same MSTP region? (Choose two.)

A.    mstp-version
B.    configuration-name
C.    msti-revision
D.    revision-level

Answer: BD

NEW QUESTION 187
What are two characteristics of a traditional Ethernet LAN? (Choose two.)

A.    Nodes share a physical medium.
B.    Nodes can successfully transmit simultaneously.
C.    It consists of a single broadcast domain.
D.    Nodes use a step-up algorithm when collisions are detected.

Answer: AC

NEW QUESTION 188
In an IS-IS network, which device represents the pseudo-node?

A.    a designated intermediate system
B.    an area border router
C.    a router with an IS-IS export policy
D.    a router connected to the backbone

Answer: A

NEW QUESTION 189
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)

A.    IIH
B.    LSP
C.    PSNP
D.    CSNP

Answer: CD

NEW QUESTION 190
Which two values are used by an RSTP bridge to remove stale BPDU information? (Choose two.)

A.    Message Age
B.    Forwarding Delay
C.    Hello Time
D.    Max Age

Answer: AD

NEW QUESTION 191
Which two statements are correct regarding TLVs in IS-IS? (Choose two.)

A.    PDUs contain different TLVs.
B.    TLVs contain different PDUs.
C.    The TLV attributes are type, length, and value.
D.    The TLV attributes are time. Length, and variable.

Answer: AC

NEW QUESTION 192
What are two methods for decreasing the size of an OSPF link-state database (LSDB)? (Choose two.)

A.    Ensure that all routers on a shared segment are configured with a priority value of 0.
B.    Use an interface type of p2p when possible.
C.    Segment large groups of routers into areas.
D.    Change a stub area to NSSA when possible.

Answer: BC

NEW QUESTION 193
Which two Layer 2 protocols are supported on MX Series devices? (Choose two.)

A.    BGP
B.    RIP
C.    RSTP
D.    MSTP

Answer: CD

NEW QUESTION 194
Which statement is true about routing instances on Junos devices?

A.    Routing information cannot be shared between routing instance.
B.    Each routing protocol runs in a separate routing instance.
C.    Junos device support only one routing instance.
D.    Each routing instance is a unique grouping of routing tables, interfaces, and routing protocol parameters.

Answer: D

NEW QUESTION 195
Which three statements are true about GRES? (Choose three.)

A.    Kernel information is preserved.
B.    Interface information is preserved.
C.    GRES requires only one RE.
D.    GRES requires redundant REs.
E.    Control plane information is preserved.

Answer: ABD

NEW QUESTION 196
Which two problems occur when increasing numbers of users are added to an Ethernet LAN with no switches present? (Choose two.)

A.    There is a greater chance for collisions to occur.
B.    The MAC table sizes increase.
C.    Some devices will not see certain traffic.
D.    There is unnecessary consumption of network bandwidth.

Answer: AD

NEW QUESTION 197
……


Thanks for reading the newest JN0-362 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-362 dumps in VCE and PDF here: https://www.passleader.com/jn0-362.html (199 Q&As Dumps)

Also, you can download that PassLeader JN0-362 braindumps from Google Drive: https://drive.google.com/drive/folders/1wjEU2VsvxU7ITfkLl3Pf26FRYbLheGPy (~More JN0-362 Exam Questions in PDF file~)