The newest Juniper JN0-363 dumps are available from PassLeader, you can get both JN0-363 VCE dumps and JN0-363 PDF dumps from PassLeader! PassLeader have added the newest JN0-363 exam questions into its JN0-363 VCE and PDF dumps now, the new JN0-363 braindumps will help you 100% passing the JNCIS-SP JN0-363 exam. Welcome to download the valid PassLeader JN0-363 dumps VCE and PDF here: https://www.passleader.com/jn0-363.html (199 Q&As Dumps –> 293 Q&As Dumps)
Besides, download that PassLeader JN0-363 braindumps from Google Drive: https://drive.google.com/drive/folders/1-A1yRzN9Nc4dyCRB0RnDiAdkfO5r9RUS (~More JN0-363 Exam Questions in PDF file~)
NEW QUESTION 161
Which three statements are true about GRES? (Choose three.)
A. Kernel information is preserved.
B. Interface information is preserved.
C. GRES requires only one RE.
D. GRES requires redundant REs.
E. Control plane information is preserved.
Answer: ABD
NEW QUESTION 162
Which two problems occur when increasing numbers of users are added to an Ethernet LAN with no switches present? (Choose two.)
A. There is a greater chance for collisions to occur.
B. The MAC table sizes increase.
C. Some devices will not see certain traffic.
D. There is unnecessary consumption of network bandwidth.
Answer: AD
NEW QUESTION 163
Which three statements are true about BGP? (Choose three.)
A. iBGP peering adds value in small networks with a single upstream connection.
B. iBGP peering adds value in small networks with multiple upstream connections.
C. eBGP peering adds value in small networks with multiple upstream connections.
D. iBGP peering adds value in large enterprise environments with multiple upstream connections.
E. eBGP peering adds value in large enterprise environments with multiple upstream connections.
Answer: CDE
NEW QUESTION 164
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)
A. protocol
B. source port
C. destination port
D. source address
E. destination address
Answer: ADE
NEW QUESTION 165
Which two statements reflect benefits of performing per-flow load balancing over per-packet load balancing? (Choose two.)
A. All physical links in the network are used equally.
B. Packets arrive at the destination in the order they were sent.
C. Provides easier implementation of class of service policies.
D. Allows the destination host to re-order packets and increase performance.
Answer: BC
NEW QUESTION 166
What are three valid BGP message types? (Choose three.)
A. Refresh
B. Hello
C. Route
D. Keepalive
E. Open
Answer: ADE
NEW QUESTION 167
Which two configuration elements must match on all switches participating in the same MSTP region? (Choose two.)
A. mstp-version
B. configuration-name
C. msti-revision
D. revision-level
Answer: BD
NEW QUESTION 168
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
A. Nodes share a physical medium.
B. Nodes can successfully transmit simultaneously.
C. It consists of a single broadcast domain.
D. Nodes use a step-up algorithm when collisions are detected.
Answer: AC
NEW QUESTION 169
Before configuring an RSVP LSP in your network, you first apply a baseline configuration to all of the routers. Which three configuration elements are minimally required in the baseline? (Choose three.)
A. family mpls on the loopback interfaces
B. family mpls on the transit interfaces
C. protocols ldp for the appropriate interfaces
D. protocols mpls for the appropriate interfaces
E. protocols rsvp for the appropriate interfaces
Answer: BDE
NEW QUESTION 170
Router B is an OSPF router connected to both Area 0 and Area 2. Area 2 has been configured as a totally stubby area. Which three LSA types does Router B suppress from Area 2? (Choose three.)
A. Router LSA
B. Network LSA
C. External LSA
D. Summary LSA
E. ASBR Summary LSA
Answer: CDE
NEW QUESTION 171
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)
A. IIH
B. LSP
C. PSNP
D. CSNP
Answer: CD
NEW QUESTION 172
Which two values are used by an RSTP bridge to remove stale BPDU information? (Choose two.)
A. Message Age
B. Forwarding Delay
C. Hello Time
D. Max Age
Answer: AD
NEW QUESTION 173
Which two statements are correct regarding TLVs in IS-IS? (Choose two.)
A. PDUs contain different TLVs.
B. TLVs contain different PDUs.
C. The TLV attributes are type, length, and value.
D. The TLV attributes are time, length, and variable.
Answer: AC
NEW QUESTION 174
What are two methods for decreasing the size of an OSPF link-state database (LSDB)? (Choose two.)
A. Ensure that all routers on a shared segment are configured with a priority value of 0.
B. Use an interface type of p2p when possible.
C. Segment large groups of routers into areas.
D. Change a stub area to NSSA when possible.
Answer: BC
NEW QUESTION 175
Which two Layer 2 protocols are supported on MX Series devices? (Choose two.)
A. BGP
B. RIP
C. RSTP
D. MSTP
Answer: CD
NEW QUESTION 176
What are two benefits of using an OSPF designated router (DR)? (Choose two.)
A. Reduces the size of the link-state database.
B. Reduces LSA flooding on a broadcast segment.
C. Reduces LSA flooding throughout an OSPF area.
D. Reduces router resources used.
Answer: BD
NEW QUESTION 177
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)
A. This command can only be issued on the master Routing Engine.
B. This command displays the status of graceful switchover.
C. This command can only be issued on the backup Routing Engine.
D. This command displays the status of the interface and process databases.
E. This command displays the status of the kernel database.
Answer: BCE
NEW QUESTION 178
Which two statements are correct regarding VPLS mesh groups? (Choose two.)
A. Unicast packets destined to another PE router within the same mesh group are dropped by the local PE router.
B. Unicast packets destined to another PE router in a different mesh group are dropped by the local PE router.
C. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all local CE routers.
D. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all remote PE routers.
Answer: AC
NEW QUESTION 179
Which two events could cause the BGP Active state to appear? (Choose two.)
A. The local router does not have a route to the peer device.
B. The local router failed to establish a TCP connection with the peer device.
C. A firewall is stopping all UDP packets.
D. The BGP configuration is incomplete.
Answer: BD
NEW QUESTION 180
You have been asked to provision a service provider’s network to accommodate Layer 3 VPNs as defined in RFC 4364. Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)
A. All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.
B. All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.
C. All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
D. All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
E. All Juniper Networks PE routers must be configured with a routing-instance containing the CE-facing interface.
Answer: BDE
NEW QUESTION 181
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain. Which two tasks does the bridge perform in response to receiving a frame with an unknown unicast destination MAC address? (Choose two.)
A. It drops the frame.
B. It floods the frame out of all interfaces except the one on which is was received.
C. It learns the destination MAC address.
D. It learns the source MAC address.
Answer: BD
NEW QUESTION 182
You are adding non-forwarding route reflectors to your network. Which three actions ensure that VPN routes are advertised properly? (Choose three.)
A. Use rib-groups to add IGP routes to inet.3 and/or inet6.3 on the route reflectors.
B. Add MPLS LSPs between the route reflectors and their client routers.
C. Add the route reflectors to the same IGP domain as their clients.
D. Use rib-groups to add VPN routes to inet.0 and/or inet6.0 on the route reflectors.
E. Add a static default route to inet.3 and/or inet6.3 on the route reflectors.
Answer: ABE
NEW QUESTION 183
Which two statements describe advantages of using BGP for VPLS signaling instead of LDP signaling? (Choose two.)
A. There is no need for MPLS signaling protocol.
B. There is a well-defined scaling hierarchy.
C. There is a separation of signaling from other services.
D. There is auto discovery.
Answer: BD
NEW QUESTION 184
Which two statements are true when configuring OSPF authentication? (Choose two.)
A. An OSPF link can support both simple password and MD5 authentication at the same time.
B. An MD5 password requires a key ID.
C. You can configure multiple MD5 passwords simultaneously on the same link.
D. If the MD5 password negotiation fails, you can configure OSPF to automatically use a simple password as a backup.
Answer: BC
NEW QUESTION 185
Which three statements are true about the BGP community attribute? (Choose three.)
A. There are three well-known communities.
B. Communities can be used to signal local preference in other AS networks.
C. Only well-known communities can be passed between AS networks.
D. Routing policies can be simplified using BGP communities.
E. Communities are used in the route selection process.
Answer: ABD
NEW QUESTION 186
……
Thanks for reading the newest JN0-363 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-363 dumps in VCE and PDF here: https://www.passleader.com/jn0-363.html (199 Q&As Dumps –> 293 Q&As Dumps)
Also, you can download that PassLeader JN0-363 braindumps from Google Drive: https://drive.google.com/drive/folders/1-A1yRzN9Nc4dyCRB0RnDiAdkfO5r9RUS (~More JN0-363 Exam Questions in PDF file~)