The newest Juniper JN0-682 dumps are available from PassLeader, you can get both JN0-682 VCE dumps and JN0-682 PDF dumps from PassLeader! PassLeader have added the newest JN0-682 exam questions into its JN0-682 VCE and PDF dumps now, the new JN0-682 braindumps will help you 100% passing the JNCIP-DC JN0-682 exam. Welcome to download the valid PassLeader JN0-682 dumps VCE and PDF here: https://www.passleader.com/jn0-682.html (75 Q&As Dumps –> 161 Q&As Dumps)
Besides, download that PassLeader JN0-682 braindumps from Google Drive: https://drive.google.com/drive/folders/18iiwQDF9nGwqs6LrNh3LWTpkJ-epMlBb (FREE VERSION!!!)
NEW QUESTION 1
A client with five data centers spread around the country uses MPLS L2VPNs to provides point-to-point data center interconnect between each data center in a full-mesh network. The client Is considering an MPLS EVEN implementation. In this scenario, what are three advantages of using MPL5 EVEN interconnects? (Choose two.)
A. The provide for static configuration that does not require a Dynamic Routing Protocol.
B. They provide for a local proxy ARP/ND resolution.
C. They provide for point to multipoint connectivity.
D. They provide for a MAC learning in the control plane.
E. They provide for lower transmission latency.
Answer: BCD
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/bgp-vpls-to-evpn-migration.html
NEW QUESTION 2
You are configuring an EVPN overlay network. You want to ensure that leaf devices can respond to ARP requests from locally connected hosts when the leaf device knows the MAC of the intended destination. In this scenario, what should you configure on the leaf devices to accomplish this task?
A. Proxy ARP.
B. Static ARP entries.
C. Persistent MAC learning.
D. IGMP snooping.
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/evpn-proxy-arp-support.html
NEW QUESTION 3
Which protocol is used between VCF member devices to create a loop-free topology?
A. LLDP
B. MDTP
C. RSTP
D. VCCP
Answer: D
NEW QUESTION 4
Which protocol replicates forwarding information between MC-LAG peers?
A. VCCP
B. ICCP
C. VRRP
D. LLDP
Answer: B
Explanation:
The MC-LAG peers use the Inter-Chassis Control Protocol (ICCP) to exchange control information and coordinate with each other to ensure that data traffic is forwarded properly. ICCP replicates control traffic and forwarding states across the MC-LAG peers and communicates the operational state of the MC-LAG members.
https://www.juniper.net/documentation/en_US/junos/topics/concept/mc-lag-feature-concepts.html
NEW QUESTION 5
You are asked to design a deployment plan for many QFX Series switches using ZTP. The ZTP deployment plan must ensure all switches are configured with their designated configuration file. Which DHCP option and subscription combination would be used to accomplish this task?
A. DHCP option 43 a suboption of 00.
B. DHCP option 66 a suboption of 01.
C. DHCP option 66 a suboption of 00.
D. DHCP option 43 a suboption of 01.
Answer: D
NEW QUESTION 6
You are asked to deploy 20 QFX Series devices using ZTP Each QFX5 100 requires FTP server. In this scenario, which two components must you configure on the DHCP Server? (Choose two.)
A. The MAC address of the FTP server.
B. The IP address of the FTP server.
C. The MAC address of each QFX5100.
D. The MAC address of each FTP QFX5100.
Answer: AB
NEW QUESTION 7
What are two methods used to scale an IBGP IP Fabric? (Choose two.)
A. Spanning tree.
B. Redundant trunk groups.
C. Route reflection.
D. Confederations.
Answer: CD
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-confederations-for-scaling.html#id-understanding-bgp-confederations
NEW QUESTION 8
You are asked to enable plug-and-play line card switches in an active VCF without making any future Junos configuration charges. You are also required to ensure that all new line card are automatically upgrade to the correct Junos version without any manual intervention. In this scenario, which two actions will accomplish this task? (Choose two.)
A. Set the virtual Chassis as auto-provisioned before the line cars are inserted.
B. Ensure that the newly instead card’s MAC addresses are present in the DHCP configuration for ZTP.
C. Set the Virtual Chassis as per-provision before the line are inserted.
D. Configure the auto-sw-update parameter on the VCF before inserting new line cards.
Answer: AD
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/auto-provisioned-virtual-chassis.html
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/virtual-chassis-ex4200-software-automatic-update-ex-series-cli.html
NEW QUESTION 9
Which two statements describe MAC address learning for VPLS and EVPN? (Choose two.)
A. VPLS learns MAC addresses in the data plane.
B. EVPN learns MAC addresses in the data plane.
C. EPLS learns MAC addresses in the control plane.
D. EVPN learns MAC addresses in the control plane.
Answer: AD
NEW QUESTION 10
What is the endpoint of a VXLAN tunnel?
A. DLCI
B. VTEP
C. LSR
D. VCF
Answer: B
NEW QUESTION 11
What are three functions supported by the Contrail Command user interface? (Choose three.)
A. Integrated syslog collector.
B. Enabling VM-to-BMS bridging.
C. Configuring management domains.
D. Onboarding of an IP fabric.
E. Creating virtual network.
Answer: BDE
NEW QUESTION 12
You are designing a Layer 3 fabric underlay using EBGP. You will implement an E VPN-signaled VXLAN overlay on the Layer 3 fabric. In this scenario, what must you do in the underlay to ensure that the VXLAN overlay will be able to function properly?
A. The underlay should support the PIM protocol.
B. Each device in the underlay should advertise its loopback address.
C. The underlay should be configured with a separate VRF to each potential tenant.
D. The underlay should advertise the host connected interlaces on all leaf device.
Answer: B
NEW QUESTION 13
What are the two valid types of VXLAN signaling? (Choose two.)
A. EVPN
B. RSVP
C. RSTP
D. MPLS
Answer: AD
NEW QUESTION 14
You work in a data center where VMs and hosts are frequently moved. Your design needs to eliminate inefficient traffic flows. In this scenario, which two solutions will satisfy this requirement? (Choose two.)
A. VXLAN
B. EVPN
C. VMTO
D. VPLS
Answer: BC
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/evpn-ingress-vmto.html
NEW QUESTION 15
A customer notices that all traffic is traveling over a single link within their partially meshed IP Fabric using IBGP. While troubleshooting, the customer notices that the configuration is missing a configuration parameter. Which parameter would the customer use to solve this problem?
A. accept-remote-nexthop
B. advertise-peer-as
C. add-path
D. multihop
Answer: C
NEW QUESTION 16
……
Thanks for reading the newest JN0-682 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-682 dumps in VCE and PDF here: https://www.passleader.com/jn0-682.html (75 Q&As Dumps –> 161 Q&As Dumps)
Also, you can download that PassLeader JN0-682 braindumps from Google Drive: https://drive.google.com/drive/folders/18iiwQDF9nGwqs6LrNh3LWTpkJ-epMlBb (FREE VERSION!!!)
