[3-July-2022] New PassLeader JN0-363 JNCIS-SP Dumps with VCE and PDF (New Questions)

The newest Juniper JN0-363 dumps are available from PassLeader, you can get both JN0-363 VCE dumps and JN0-363 PDF dumps from PassLeader! PassLeader have added the newest JN0-363 exam questions into its JN0-363 VCE and PDF dumps now, the new JN0-363 braindumps will help you 100% passing the JNCIS-SP JN0-363 exam. Welcome to download the valid PassLeader JN0-363 dumps VCE and PDF here: https://www.passleader.com/jn0-363.html (65 Q&As Dumps –> 199 Q&As Dumps –> 293 Q&As Dumps)

Besides, download that PassLeader JN0-363 braindumps from Google Drive: https://drive.google.com/drive/folders/1-A1yRzN9Nc4dyCRB0RnDiAdkfO5r9RUS (~More JN0-363 Exam Questions in PDF file~)

NEW QUESTION 1
Which statement is true about an OSPF broadcast link?

A.    All routers form an adjacency only with the BDR.
B.    All routers form an adjacency only with the DR.
C.    All routers form an adjacency with all other routers.
D.    All routers form an adjacency with both the DR and BDR.

Answer: D
Explanation:
https://sites.google.com/site/amitsciscozone/home/juniper-junos/junos–ospf-designated-router

NEW QUESTION 2
Which two statements are true for GRE tunneling? (Choose two.)

A.    GRE tunnel endpoints must have a valid route to the remote endpoint.
B.    GRE tunnels support multiple logical units per interface.
C.    GRE tunnels are stateful by default.
D.    GRE tunnels support only one logical unit per interface.

Answer: AB
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/filtering-unicast-packets-multicast-tunnel-interfaces.html#id-configuring-unicast-tunnels

NEW QUESTION 3
What is the Junos default router priority advertisement value for IS-IS?

A.    64
B.    32
C.    0
D.    127

Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/routing-protocol-is-is-security-designated-router-understanding.html#:~:text=If%20routers%20in%20the%20network,a%20priority%20value%20of%2064.

NEW QUESTION 4
In a stateless IPv6 auto-configuration scenario, what is the host’s IPv6 address if the interface’s MAC address is 12:34:ab:cd:ef:56?

A.    fe80::1234:abff:fecd:ef56/64
B.    fe8::1234:abff:fecd:ef56/64
C.    fec0::1234:abff:fecd:ef56/64
D.    fe80::1234:abcd:ef56/64

Answer: D

NEW QUESTION 5
You are asked to change the default TTL handling behavior on your Junos device to ensure that the RSVP-signaled LSPs in your MPLS network cannot be mapped. Which configuration should be performed to accomplish this task?

A.    Configure the no-decrement-ttl parameter for each LSP on the ingress device.
B.    Configure the no-propagate-ttl parameter for each LSP on the egress device.
C.    Configure the no-propagate-ttl parameter for each LSP on the ingress device.
D.    Configure the no-decrement-ttl parameter for each LSP on the egress device.

Answer: B

NEW QUESTION 6
The IPv6 Neighbor Discovery Protocol (NDP) performs the same function as which two IPv4 protocols? (Choose two.)

A.    ICMP
B.    ARP
C.    DNS
D.    DHCP

Answer: AB
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ipv6-neighbor-discovery.html#:~:text=Neighbor%20discovery%20for%20IPv6%20replaces,Discovery%20protocol%20(NDP)%20messages.

NEW QUESTION 7
Which two IP addresses are considered Martian addresses? (Choose two.)

A.    0.0.0.0/8
B.    192.168.0.0/8
C.    240.0.0.0/4
D.    169.254.0.0/16

Answer: AC
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/recognize-martian-addr-routing.html

NEW QUESTION 8
What is the correct description of an Area Border Router (ABR)?

A.    An ABR is an OSPF router with links in two areas, connecting OSPF areas to the backbone.
B.    An ABR is an OSPF router that injects routing information from outside the OSPF AS.
C.    An ABR is an OSPF router with at least one link in a Layer 2 area.
D.    An ABR is an OSPF router with all of its links within an area.

Answer: A

NEW QUESTION 9
Which two statements are true about IP and GRE tunnels? (Choose two.)

A.    The protocol field is changed in the inner IP packet header.
B.    Tunnel traffic is encrypted.
C.    The TTL field is changed in the inner IP packet header.
D.    Tunnel endpoints need a valid route to the remote endpoint.

Answer: CD

NEW QUESTION 10
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)

A.    It decrements the time-to-live (TTL) counter by one in the inner IP header.
B.    It modifies the source and destination addresses in the inner IP header.
C.    It adds an outer IP header with the destination address of the remote tunnel endpoint.
D.    It creates and adds a new inner IP header with the remote destination device’s IP address.

Answer: AC

NEW QUESTION 11
You are deploying an RSVP-based MPLS network in your core. You must ensure that your LSPs are continually analyzing the usage levels and recalculating the best LSP. You also want to ensure that a minimal amount of traffic is lost when an LSP is re-signaled without user intervention. Which two features must be enabled in this scenario? (Choose two.)

A.    adaptive
B.    MPLS fast reroute
C.    class of service
D.    auto-bandwidth

Answer: BD

NEW QUESTION 12
Which two statements are true when considering logical systems? (Choose two.)

A.    Logical systems do not support nonstop active routing.
B.    Logical systems share the master routing table and can create routing instances.
C.    Logical tunnels cannot be used to connect logical systems.
D.    Logical systems provide management separation by providing user access per logical system.

Answer: CD
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-logical-systems-for-routers-and-switches.html

NEW QUESTION 13
To which multicast address is a VRRP advertisement packet sent?

A.    224.0.0.6
B.    224.0.0.18
C.    224.0.0.22
D.    224.0.0.13

Answer: B
Explanation:
https://tools.ietf.org/html/rfc3768

NEW QUESTION 14
In which situation would you disable penultimate-hop popping?

A.    When you want to bypass a penultimate router that does not support IPv6 tunneling.
B.    When you want to ensure the penultimate router can perform the destination route lookup.
C.    When you want to enforce the same class-of-service behavior through the entire LSP.
D.    When you want to utilize a penultimate router that supports IPv6 tunneling.

Answer: C

NEW QUESTION 15
Which two statements are true about IBGP on MX Series devices? (Choose two.)

A.    Neighbors can be located anywhere within the AS.
B.    Interface Lo0 must be used for peering.
C.    It does not support multihop.
D.    It is loop free by default.

Answer: AD
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-ibgp-peering.html

NEW QUESTION 16
When working with an MPLS LSP, what will the install 172.16.6.0/24 active command accomplish?

A.    The command will swap the prefix from inet.0 to inet.3.
B.    The command will swap the prefix from inet.3 to inet.0.
C.    The command will install the prefix in inet.0 rather than inet.3.
D.    The command will install the prefix in inet.3 rather than inet.0.

Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/lsp-routes.html#id-21214

NEW QUESTION 17
Which statement is true when using MVRP on MX Series devices?

A.    MVRP works with MSTP and RSTP, but not VSTP.
B.    MVRP works with RSTP and VSTP, but not MSTP.
C.    MVRP works with MSTP and VSTP, but not RSTP.
D.    MVRP does not work with MSTP, RSTP, and VSTP.

Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/mvrp.html

NEW QUESTION 18
Which IPv6 extension header notifies intermediary devices that they must inspect the packet’s options?

A.    destination options header
B.    routing header
C.    hop-by-hop options header
D.    fragment header

Answer: B
Explanation:
https://en.wikipedia.org/wiki/IPv6_packet

NEW QUESTION 19
You want to make use of the nonstop active routing (NSR) feature. Which complementary feature must also be enabled?

A.    IP anycast.
B.    Graceful restart.
C.    Virtual Router Redundancy Protocol.
D.    Graceful Routing Engine switchover.

Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/nsr-overview.html

NEW QUESTION 20
Which two routing protocols make use of a designated router, or pseudo node, to represent a broadcast network? (Choose two.)

A.    BGP
B.    OSPF
C.    MPLS
D.    IS-IS

Answer: BD

NEW QUESTION 21
……


Thanks for reading the newest JN0-363 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-363 dumps in VCE and PDF here: https://www.passleader.com/jn0-363.html (65 Q&As Dumps –> 199 Q&As Dumps –> 293 Q&As Dumps)

Also, you can download that PassLeader JN0-363 braindumps from Google Drive: https://drive.google.com/drive/folders/1-A1yRzN9Nc4dyCRB0RnDiAdkfO5r9RUS (~More JN0-363 Exam Questions in PDF file~)