The newest Juniper JN0-663 dumps are available from PassLeader, you can get both JN0-663 VCE dumps and JN0-663 PDF dumps from PassLeader! PassLeader have added the newest JN0-663 exam questions into its JN0-663 VCE and PDF dumps now, the new JN0-663 braindumps will help you 100% passing the JNCIP-SP JN0-663 exam. Welcome to download the valid PassLeader JN0-663 dumps VCE and PDF here: https://www.passleader.com/jn0-663.html (218 Q&As Dumps –> 242 Q&As Dumps)
Besides, download that PassLeader JN0-663 braindumps from Google Drive: https://drive.google.com/drive/folders/1I0sqcCqEUuMy4wiZLNDKOYlGvjynmGgU (~More JN0-663 Exam Questions in PDF file~)
NEW QUESTION 186
Which two statements are true about what a route reflector does by default when distributing routes it has received from reflector clients? (Choose two.)
A. It changes the default BGP attributes to inform peers that it is a route reflector.
B. It adds its cluster ID to the client-received routes.
C. It sets the next hop of all routes to “self” to prevent routing loops.
D. It does not change any received BGP attributes.
Answer: BD
NEW QUESTION 187
Which two statements about virtual links are correct? (Choose two.)
A. Virtual links are used for control plane traffic.
B. Virtual links are point-to-point.
C. Virtual links are excluded from SPF calculations.
D. Virtual links are bidirectional.
Answer: AB
NEW QUESTION 188
Referring to the exhibit:
You notice an inconsistency between the routing table and the OSPF database, as shown in the exhibit. What are two reasons for this behavior? (Choose two.)
A. The LSA is a Type 4 LSA.
B. An OSPF export policy is being applied to the route.
C. An OSPF import policy is being applied to the route.
D. The LSA is a Type 5 LSA.
Answer: CD
NEW QUESTION 189
You are asked to configure a series of interface policers and firewall filters, which include policers, on the same device You must ensure that the two configuration methods do not conflict. What are two considerations when performing this task? (Choose two.)
A. On inbound traffic, interface policers are applied before firewall filters.
B. On inbound traffic, firewall filters are applied before interface policers.
C. On outbound traffic, interface policers are applied before firewall filters.
D. On outbound traffic, firewall filters are applied before interface policers.
Answer: AD
NEW QUESTION 190
What information is stored in a VRF table for a BGP Layer 2 VPN? (Choose three.)
A. remote interface of local CE device
B. Layer 2 encapsulation
C. logical interface provisioned to local CE device local site ID
D. label-switched path
Answer: BCD
NEW QUESTION 191
Referring to the exhibit:
A Layer 3 VPN exists in the provider network and the CE devices are connecting to the PE devices using BGP. The PE devices are receiving BGP routes from the CE devices and the PE devices have the CE BGP routes in their respective routing tables. However, the remote CE devices are not receiving the BGP routes. Referring to the exhibit, what is the problem?
A. The CE devices are detecting an AS loop.
B. A VRF target community mismatch exists.
C. A route distinguisher mismatch exists.
D. The PE devices are detecting an AS loop.
Answer: A
NEW QUESTION 192
What occurs when a router running IS-IS receives an LSP with the overload bit set?
A. The LSP is not added to the link-state database.
B. The LSP’s metric will be set to 65535.
C. The LSP is ignored during SPF calculation.
D. The LSP’s metric will be set to 16777215.
Answer: D
NEW QUESTION 193
What are two reasons an IBGP learned route would be hidden? (Choose two.)
A. The route is suppressed by damping.
B. The route has a next hop of the local routing device.
C. The route is rejected by an export policy.
D. The route has an empty AS path.
Answer: AB
NEW QUESTION 194
Referring to the exhibit:
Which two statements about route reflectors are correct? (Choose two.)
A. RR2 adds its cluster ID when advertising routes from Client4 to Client3.
B. RR2 advertises routes learned from Client3 to EBGP2 with itself as the next hop.
C. RR1 advertises routes learned from Client1 to RR2 with itself as the next hop.
D. RR1 and RR2 need the same cluster ID to exchange routes learned from their clients.
Answer: AB
NEW QUESTION 195
A customer recently migrated to IS-IS and is concerned about resource starvation when the routing protocol daemon (RPD) starts. To resolve this issue and protect R2 and R3, which feature should you implement?
A. Deploy firewall filters to limit the prefix count in the route table.
B. Double the policy-options damping half-life timer to let the network settle.
C. Use the forwarding-options ip-options-protocol-queue parameter to increase resources.
D. Implement the overload bit and timer to signal service availability.
Answer: D
NEW QUESTION 196
You are creating a new LDP signaled Layer 2 circuit between three customer sites. In this scenario, which two statements are correct? (Choose two.)
A. LDP is used to exchange the virtual circuit labels with other PEs.
B. You are allowed to tunnel your LDP sessions through RSVP LSPs.
C. You are not allowed to use any RSVP-signaled LSPs in your core network.
D. BGP is used to exchange the virtual circuit labels with other PEs.
Answer: AB
NEW QUESTION 197
Which two statements regarding ingress replication in EVPN are correct? (Choose two.)
A. Ingress replication will replicate all BUM traffic to all remote PEs in the EVI.
B. Ingress replication relies on PIM to build the multicast replication tree.
C. Ingress replication labels are learned from remote PEs through the EVPN Type-3 route.
D. Ingress replication is only supported in vrf-type routing instances.
Answer: AC
NEW QUESTION 198
Referring to the exhibit:
Which path would traffic passing through R1 take to get?
A. R1 -> R2 -> R4 -> R6
B. R1 -> R2 -> R3 -> R6
C. R1 -> R3 -> R5 -> R6
D. R1 -> R3 -> R4 -> R6
Answer: C
NEW QUESTION 199
Referring to the exhibit:
All adjacencies have been formed, no extra options have been configured, and no policies have been written. Referring to the exhibit, which two statements are correct? (Choose two.)
A. R1 cannot reach R5.
B. R1 will create its own default route that points to R2.
C. R2 will create a default route and send it as a TLV to R1.
D. R1 can reach R5.
Answer: CD
NEW QUESTION 200
You are creating an LDP-signaled Layer 2 circuit between two sites. Site1 and Site2 use different VLAN IDs to connect to your PE devices In this scenario, which encapsulation type must be used on the logical interfaces?
A. vlan-bridge
B. vlan-ccc
C. vlan-tcc
D. vlan-vpls
Answer: C
NEW QUESTION 201
……
Thanks for reading the newest JN0-663 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-663 dumps in VCE and PDF here: https://www.passleader.com/jn0-663.html (218 Q&As Dumps –> 242 Q&As Dumps)
Also, you can download that PassLeader JN0-663 braindumps from Google Drive: https://drive.google.com/drive/folders/1I0sqcCqEUuMy4wiZLNDKOYlGvjynmGgU (~More JN0-663 Exam Questions in PDF file~)
