The newest Juniper JN0-663 dumps are available from PassLeader, you can get both JN0-663 VCE dumps and JN0-663 PDF dumps from PassLeader! PassLeader have added the newest JN0-663 exam questions into its JN0-663 VCE and PDF dumps now, the new JN0-663 braindumps will help you 100% passing the JNCIP-SP JN0-663 exam. Welcome to download the valid PassLeader JN0-663 dumps VCE and PDF here: https://www.passleader.com/jn0-663.html (138 Q&As Dumps –> 218 Q&As Dumps –> 242 Q&As Dumps)
Besides, download that PassLeader JN0-663 braindumps from Google Drive: https://drive.google.com/drive/folders/1I0sqcCqEUuMy4wiZLNDKOYlGvjynmGgU (~More JN0-663 Exam Questions in PDF file~)
NEW QUESTION 1
You are configuring an OSPF network. You want to break it up into three areas. Area 0 contains two routers. A router connects to each router in Area 0 with a single link. Which two statements are true? (Choose two.)
A. The non-zero areas must have unique area IDs.
B. The routes from the non-zero areas will be summarized by default.
C. The routes from the non-zero areas will not be summarized by default.
D. The non-zero areas can both have the same area ID.
Answer: CD
NEW QUESTION 2
You use OSPF as your IGP. You are configuring an MPLS overlay that crosses your network and want to configure engineered paths that use link colors for path selection. Which action must you perform?
A. Configure [set protocols mpls no-cspf].
B. Configure traffic-engineering under [protocols ospf].
C. Use LDP signaled LSPs.
D. Configure [set protocols mpls traffic-engineering bgp-igp].
Answer: B
NEW QUESTION 3
Referring to the exhibit:
A network administrator is migrating from IPv4 to IPv6 and one of the IS-IS adjacencies is not coming up between R1 and R2. Which action will solve the problem?
A. Configure an IPv4 address on interface ge-0/0/1 on R1.
B. Configure topologies ipv4-unicast from protocols isis on R2.
C. Remove topologies ipv6-unicast from protocols isis on R1.
D. Remove topologies ipv6-unicast from protocols isis on R2.
Answer: A
NEW QUESTION 4
You are provisioning a L3VPN service for your customer. Customer traffic must leave your AS to reach a remote site. Which statement is true?
A. A single LSP can be created across AS boundaries.
B. GRE tunneling must be used to cross the peer AS.
C. A L3VPN must be used to cross the peer AS.
D. BGP can advertise labels to the peer AS.
Answer: D
NEW QUESTION 5
You have configured a L3VPN across your network and are using GRE tunnels for transit. Which two statements are true? (Choose two.)
A. The gre tunnel interface must be placed in the routing instance.
B. The tunnel interface must be added to inet.3.
C. Route reflectors cannot be used for route exchange.
D. Family MPLS must be enabled on the tunnel interface.
Answer: BD
NEW QUESTION 6
Referring to the exhibit:
You have the Layer 2 VPN configuration shown in the exhibit. You are asked to determine the remote site ID for ge-1/0/1.512. In this scenario, what is the remote site ID?
A. 5
B. 3
C. 1
D. 4
Answer: C
NEW QUESTION 7
Packets enter a Junos device and are classified with CoS. During the processing of the packet, the classification of the packets is changed. Which two statements are true regarding default CoS rewrite on Junos devices? (Choose two.)
A. Bits associated with a DSCP traffic class are rewritten to match the new traffic classification values.
B. Bits associated with MPLS traffic class are rewritten to match the new traffic classification values.
C. Bits associated with DSCP traffic class are not rewritten to match the new traffic classification values.
D. Bits associated with MPLS traffic class are not rewritten to match the new traffic classification values.
Answer: BC
NEW QUESTION 8
Junos devices use the token bucket algorithm for policing. Which two statements are true regarding the token bucket algorithm? (Choose two.)
A. Policers transmit streams of traffic at the maximum interface speed until the burst rate is reached.
B. Policers do not reduce the speed of an interface.
C. Policers reduce the speed of an interface.
D. Policers enforce gaps between transmitted packets.
Answer: BD
NEW QUESTION 9
Referring to the exhibit:
Referring to the ABR configuration shown in the exhibit, which three statements are correct? (Choose three.)
A. The ABR advertises a default route to the NSSA using a Type 7 LSA.
B. The ABR advertises a single Type 5 external LSA to the backbone area for all Type 7 LSAs in the NSSA.
C. The ABR does not summarize any routes within the 192.168.16.0/20 range.
D. The ABR advertises a Type 5 external LSA to the backbone area for each Type 7 LSA in the NSSA.
E. The ABR advertises a single Type 3 summary LSA to the backbone area for all Type 1 and Type 2 LSAs in the 192.168.16 0/20 range.
Answer: ADE
NEW QUESTION 10
Which two statements are true regarding EVPN? (Choose two.)
A. Multihomed CEs require a unique ESI for each of the links.
B. With a multihomed CE, both PEs must use the same ESI when connected to the same CE.
C. The ESI for all sites in an EVPN domain must be the same.
D. The ESI for each site in an EVPN must be unique.
Answer: BD
NEW QUESTION 11
Which function allows an OSPF network to span a L3VPN?
A. sham link
B. virtual link
C. OSPF direct peering
D. route redistribution
Answer: A
NEW QUESTION 12
Referring to the exhibit:
Traffic sent from CE-A2 to PE3 does not loop back to CE-A2 through PE2. Which two EVPN functions accomplish this task? (Choose two.)
A. split horizon
B. aliasing
C. multicast ingress replication
D. designated forwarder election
Answer: AD
NEW QUESTION 13
Referring to the exhibit:
Which three statements about route 10.222/16 are correct when using the default BGP advertisement rules? (Choose three.)
A. R2 will advertise 10.222/16 to R4 with itself as the next hop.
B. R2 will prepend AS10 when advertising 10.222/16 to R7.
C. R7 will advertise 10.222/16 to R9 with itself as the next hop.
D. R1 will advertise 10 222/16 to R2 with itself as the next hop.
E. R1 will prepend AS10 when advertising 10.222/16 to R2.
Answer: ABD
NEW QUESTION 14
Referring to IS-IS, what is the purpose of a mesh group?
A. to prevent redundant flooding of LSPs in a full mesh network
B. to guarantee delivery of LSPs in a full mesh network
C. to segment a router into multiple broadcast domains
D. to cause a router to flood LSPs to all members of a group
Answer: A
NEW QUESTION 15
Regarding VPLS, which two can be configured to prevent a loop when a CE is multihomed to a single PE? (Choose two.)
A. Unique route target for each connection
B. Spanning Tree Protocol
C. LAG
D. VLAN tagging
Answer: BC
NEW QUESTION 16
……
Thanks for reading the newest JN0-663 exam dumps! We recommend you to try the PREMIUM PassLeader JN0-663 dumps in VCE and PDF here: https://www.passleader.com/jn0-663.html (138 Q&As Dumps –> 218 Q&As Dumps –> 242 Q&As Dumps)
Also, you can download that PassLeader JN0-663 braindumps from Google Drive: https://drive.google.com/drive/folders/1I0sqcCqEUuMy4wiZLNDKOYlGvjynmGgU (~More JN0-663 Exam Questions in PDF file~)
